Material: 6061 T6 Aluminum. Surface: Anodized. Prevent brake disc collision. Protect your rear rotor from rocks and stumps. The all CNC billet aluminum design replaces the original cast aluminum caliper mount for more strength and longevity. Rear spacer catch is slot cut to allow for easier rear wheel removal. Made to fit a 203mm disc, it does not protect the new MX4 220mm disc. Now available in a dual caliper design, allows you to run a foot brake setup, while keeping the OEM brake on the handlebar.
Reference: 42092-56001-000
Talaria OEM Replacement part.
Reference: GS-027
Don't let your footpeg bracket break! Redesigned for an improved sleek look and added strength. Support it with a GritShift aluminum footpeg support brace. Riding while standing on the Sur-Ron or Segway footpegs can bend the brackets and eventually lead to bracket failure. The footpeg support brace helps you avoid a dangerous break and potentially serious...
Reference: GS-016
GritShift is tired of replacing weak floppy skid plates every other week. A change needed to incur. The fatal flaw of the Sur Ron and talaria skid plate is the lack of support, most moto-style skid plates have a support structure (Frame rail) underneath the thin lightweight metals to support and protect the skid plate from excess deformation. This is the...
Reference: 01-04190
A versatile performer with a tough nylon carcass and raised dimpled knobs that work well in a variety of terrain. Narrow knobby configuration means less of an environmental foot print on the trail. 4 ply rated. DOT approved. Not intended for extended highway use. All sizes will work for front or rear fitment. 2.85kg / 6.28 lbs
Reference: 35450-56A30-000
The radial design of the brake master ensures low friction, reducing transmission losses. It also enables the conversion of (small/large) transmission ratios, which improves modulation and control. The 4-piston brake calliper forged in one piece has a high degree of rigidity, resulting in outstanding braking force and the best possible modulation.
Reference: BFD426G1053
Suitable for all conditions. Perfectly balanced power and durability. Progressive and consistent braking with better feel. Low noise. Less wear on the brake rotors.
Reference: SH-B032
Material: 6061 T6 Aluminum. Surface: Anodized. Prevent brake disc collision. Protect your rear rotor from rocks and stumps. The all CNC billet aluminum design replaces the original cast aluminum caliper mount for more strength and longevity. Rear spacer catch is slot cut to allow for easier rear wheel removal. Made to fit a 203mm disc, it does not...
Reference: 250785-12
Made with organic materials that are blended and bound together using a resin. The compounds do include small amounts of metal to improve the braking formula but though this is a mined material the pads are largely organic so we stop short of labeling it a semi-metallic pad. The perfect blend of low noise, high power that rotor friendly to boot Priced per...
Reference: SH-B011/AL
Running our hydraulic rear foot brake and want to keep your stock or aftermarket hand brake? This dual caliper bracket enables the use of 2 independent rear brakes. Machined from 6061 aluminum, this replaces the stock cast bracket and mounts 2 calipers at a 90-degree angle. The second caliber can be stock or any compatible aftermarket caliper.
Reference: SH-B026
Required to run a 220mm disc on a bike that was originally 203mm. Universal, will fit any E-bike.
Reference: DB004W2
203mm fixed-mount Galfer rotor for mountain biking. Every high-quality, Galfer-patented Wave rotor is made from a proprietary mix of virgin high carbon 420 stainless steel, laser cut (never stamped), double disc-parallel ground to assure perfect parallel flatness and heat treated to each specific application. Seamlessly replaces stock rotor. Full...
Reference: LW-LP37
Lewis LP series brake pads offers a stronger braking performance in low-speed conditions, Commonly known as user friendly brake pads that are multipurpose. Good in wet and/or dry conditions.
Reference: 52110-YQ2B-0000
Replacement Brake Master Cylinder for Sur-Ron LB-X and Segway X260
Reference: SH-B012/AL
Folding CNC Brake lever made of 6061 T6 aluminum. Stronger and lightweight. Attention! Talaria Sting MX4 - Only compatible with LBN Brake system similar to the Sting MX3 (Red Caps on the caliper)
Reference: LW-TP37
Lewis TP series brake pads are designed for more aggressive riding, These can withstand higher temperatures than regular semi-metallic pads. Harder material will wear off the disc faster but also provide stronger braking feel.
Reference: SH-B029
Fits OEM seal (not included). Made for Sur-Ron Light Bee OEM master cylinders only.
Reference: SH-B013/AL
Front Disc Guard made of 6061 T6 aluminum and 304 stainless steel screws for Talaria / Sur-Ron / Segway electric dirt bike.
Reference: LW-LP40
Lewis LP series brake pads offers a stronger braking performance in low-speed conditions, Commonly known as user friendly brake pads that are multipurpose. Good in wet and/or dry conditions.
Material: 6061 T6 Aluminum. Surface: Anodized. Prevent brake disc collision. Protect your rear rotor from rocks and stumps. The all CNC billet aluminum design replaces the original cast aluminum caliper mount for more strength and longevity. Rear spacer catch is slot cut to allow for easier rear wheel removal. Made to fit a 203mm disc, it does not protect the new MX4 220mm disc. Now available in a dual caliper design, allows you to run a foot brake setup, while keeping the OEM brake on the handlebar.
