Required to run a 220mm disc on a bike that was originally 203mm. Universal, will fit any E-bike.
Attention! 2 sets required if you need both the front and back.
Reference: SH-B017
Direct fit upgrade floating disc for a xXx / MX4 bike!
Reference: 13213-56000-000
Talaria OEM Replacement part.
Reference: SH-B019
Upgraded 220mm floating disc for a Sur-ron Light bee / Segway x260 bike.
Reference: SR-HA024/BK
Stem Lock made with 6061 T6 aluminum with anodized surface for Talaria / Sur-Ron / Segway Electric Dirt Bike.
Reference: SH-B021
Oversized upgrade floating disc for any bike, will require the proper caliper spacers separately. Significant Brake upgrade over stock rotors.
Reference: SH-B012/GO
Folding CNC Brake lever made of 6061 T6 aluminum with anodized black surface. Stronger and lightweight.
Reference: 95-36115-K002-D
Dominion's master cylinder is factory tuned for the shortest dead stroke possible and a crisp bite point. The Dominion A4 caliper utilizes four pistons in the most structurally rigid design possible. It features a cold-forged caliper and KingPin structural pad retention bolt that increases stiffness. With a motorsports-inspired Two-Stroke dual port bleed...
Reference: BFD426G1554
Suitable for extreme terrain, varying weather conditions, or competition use. Perfect for downhill biking or lengthy periods of steady braking. Maximum stopping power in the dirt. High temperature and fade resistance. Great for wet weather and mud performance.
Reference: SH-B024
Required to run oversized 250mm brake disc.
Reference: SH-B031
Material: 6061 T6 Aluminum. Surface: Anodized. Prevent brake disc collision. Protect your rear rotor from rocks and stumps. The all CNC billet aluminum design replaces the original cast aluminum caliper mount for more strength and longevity. Rear spacer catch is slot cut to allow for easier rear wheel removal. Made to fit a 203mm disc, it does not...
Reference: 341426-15
For use in mineral-based brake and hydraulic systems specifying mineral oils. Developed in collaboration with a premium OEM component manufacturer. Mineral based formula does not damage painted surfaces or carbon fiber. Low maintenance formula does not absorb moisture like DOT fluids. High boil point and minimal frequency of system bleeds. Zero-fade...
Reference: 35533-56A03-000
Original replacements from Magura, price is for a set of 2x pads (to fit one caliper).
Reference: BFD426G1652
The Galfer E-Bike specific compound was formulated to deal with the unique needs of E-Bikes. They're long lasting and designed to manage heat extremely well given the extra weight associated with heavier bikes, often being ridden faster or downhill. We generally recommend the Pro Compound brake pad for race use or for a rider looking for an aggressive...
Reference: DB007W
223mm fixed-mount Galfer rotor for mountain biking. Every high-quality, Galfer-patented Wave rotor is made from a proprietary mix of virgin high carbon 420 stainless steel, laser cut (never stamped), double disc-parallel ground to assure perfect parallel flatness and heat treated to each specific application. Seamlessly replaces stock rotor. Full...
Reference: SH-B012/AL
Folding CNC Brake lever made of 6061 T6 aluminum. Stronger and lightweight. Attention! Talaria Sting MX4 - Only compatible with LBN Brake system similar to the Sting MX3 (Red Caps on the caliper)
Reference: SB003
This adapter will allow you to run a bicycle rotor up to 63mm larger than standard size. This is typically used to run the 223mm Galfer USA oversize brake rotor.
Reference: SH-B019
Upgraded 220mm floating disc for a Sur-ron Light bee / Segway x260 bike.
Reference: SH-B012/RE
Folding CNC Brake lever made of 6061 T6 aluminum with anodized black surface. Stronger and lightweight. Attention! Talaria Sting MX4 - Only compatible with LBN Brake system similar to the Sting MX3 (Red Caps on the caliper)
Reference: SH-B032
Material: 6061 T6 Aluminum. Surface: Anodized. Prevent brake disc collision. Protect your rear rotor from rocks and stumps. The all CNC billet aluminum design replaces the original cast aluminum caliper mount for more strength and longevity. Rear spacer catch is slot cut to allow for easier rear wheel removal. Made to fit a 203mm disc, it does not...
Required to run a 220mm disc on a bike that was originally 203mm. Universal, will fit any E-bike.
