Replacement Front Brake Master Cylinder Sur-Ron LB-X / Segway X260

Reference: SH-B023

Rear Stainless Brake Disc 203mm x 2.3mm Sur-Ron / Segway X260

Thicker 203mm brake disc - No spacers required!

Reference: SH-B028

Rear 250mm Brake caliper Mounting Bracket Talaria Sting MX3 / MX4 / XXX

Reference: SH-B026

Front / Rear +10mm Spacers (For 220 Discs) (1 Set)

Required to run a 220mm disc on a bike that was originally 203mm. Universal, will fit any E-bike.

Reference: SH-B013/AL

Front Disc Guard CNC Aluminium Talaria / Sur-Ron / Segway

Front Disc Guard made of 6061 T6 aluminum and 304 stainless steel screws for Talaria / Sur-Ron / Segway electric dirt bike.

Reference: BFD426G1053

Brake pads Galfer Standard 1053 Talaria / Sur-Ron / Segway (OEM Caliper)

Suitable for all conditions. Perfectly balanced power and durability. Progressive and consistent braking with better feel. Low noise. Less wear on the brake rotors.

Reference: SH-B007

Hydrolic Rear Foot Brake Sur-Ron LB-X / Segway X260

Custom rear hydraulic brake pedal for Sur Ron. Hydraulic master cylinder activates rear brake (replacing hand operated master cylinder) . Due to clearance issues, front most peg position is not available. Bike Requirements : Master cylinder uses only dot4/dot5.1 brake fluid and is incompatible with brakes that use mineral oil such as stock brakes. We...

Reference: 95-36115-K001-D

Complete Front Brake Kit HAYES Dominion A4 Bronze

Dominion's master cylinder is factory tuned for the shortest dead stroke possible and a crisp bite point. The Dominion A4 caliper utilizes four pistons in the most structurally rigid design possible. It features a cold-forged caliper and KingPin structural pad retention bolt that increases stiffness. With a motorsports-inspired Two-Stroke dual port bleed...

Reference: SH-B019

Rear Floating Brake Disc 220mm x 2.3mm Sur-Ron / Segway X260

Upgraded 220mm floating disc for a Sur-ron Light bee / Segway x260 bike.

Reference: SH-B014

Hydrolic Rear Foot Brake CNC Black Sur-Ron LB-X / Segway X260

Hydrolic Rear Foot Brake CNC Black for Sur-Ron LB-X and Segway X260 Made of 6061 T6 aluminum and CNC machined. Surface Treatment: Anodized. Hydraulic master cylinder activates rear brake (replacing hand operated master cylinder). Change the brake to the foot and keep the hand brake. Cater to some motorcyclists who are used to operating. Stronger and...

Reference: SH-B009

Rear Foot Brake (Regen only) Sur-Ron LB-X / Segway X260

Custom rear regen / electronic pedal for Sur Ron. This electronic foot pedal can be used with Sin-Tech or ASI BAC controllers that have an analog regen braking input. Fully adjustable pedal upper and lower travel limits. Due to clearance issues, front most peg position can not be used. Pedal outputs 0.15 to 3.7v single for pedal position. This kit is not...

Reference: SH-B018

Rear Oversized Floating Brake Disc 250mm x 2.3mm Sur-Ron / Segway X260

Oversized upgrade floating disc for Sur-Ron Light bee / Segway X260, will require the proper caliper spacers separately. Significant Brake upgrade over stock rotors.

Reference: SH-B010/BK

Rear Disc Guard CNC Black Talaria Sting MX3 / Sur-Ron LB-X

Reference: SH-B015

Plastic Rivets for Under Seat Fender (10x) Sur-Ron LB-X / Segway X260

Replacement Seat fender rivets for Sur-Ron LB-X. Come in pack of 10.

Reference: 95-36115-K003-D

Complete front brake kit HAYES Dominion A4 Black

Introducing the all-new, Stealth Dominion, our award-winning Hayes Dominion A4 brakes are back – adding even more ways for you to stop! Dominion's master cylinder is factory tuned for the shortest dead stroke possible and a crisp bite point. The Dominion A4 caliper utilizes four pistons in the most structurally rigid design possible. It features a...

Reference: SH-B027

Rear 250mm Brake caliper Mounting Bracket Sur-Ron / Segway X260

Reference: SH-B011/BK

Rear Dual Caliper Bracket CNC Black Sur-Ron LB-X / Segway X260

Running our hydraulic rear foot brake and want to keep your stock or aftermarket hand brake? This dual caliper bracket enables the use of 2 independent rear brakes. Machined from 6061 aluminum, this replaces the stock cast bracket and mounts 2 calipers at a 90-degree angle. The second caliber can be stock or any compatible aftermarket caliper.