Foldable Brake Levers CNC Gold (2) Talaria / Sur-Ron / Segway

Reference: 52280-YQ2A-0000

Rear Caliper Mount Sur-Ron LB-X / Segway X260

Replacement Rear Caliper Mount for Sur-Ron LB-X and Segway X260.

Reference: LW-LHT-004/SI

Lewis LHT (Titanium) 4-Pistons Hydraulic Brake Set (Front & Rear) Silver

Reference: SH-B031

Rear Disc Guard CNC / Dual Caliper Bracket Sur-Ron LB-X / Segway X260

Material: 6061 T6 Aluminum. Surface: Anodized. Prevent brake disc collision. Protect your rear rotor from rocks and stumps. The all CNC billet aluminum design replaces the original cast aluminum caliper mount for more strength and longevity.  Rear spacer catch is slot cut to allow for easier rear wheel removal. Made to fit a 203mm disc, it does not...

Reference: 95-36115-K002-D

Complete Rear Brake Kit HAYES Dominion A4 Bronze

Dominion's master cylinder is factory tuned for the shortest dead stroke possible and a crisp bite point. The Dominion A4 caliper utilizes four pistons in the most structurally rigid design possible. It features a cold-forged caliper and KingPin structural pad retention bolt that increases stiffness. With a motorsports-inspired Two-Stroke dual port bleed...

Reference: SH-B012/AL

Foldable Brake Levers CNC Aluminium (2) Talaria / Sur-Ron / Segway

Folding CNC Brake lever made of 6061 T6 aluminum. Stronger and lightweight. Attention! Talaria Sting MX4 - Only compatible with LBN Brake system similar to the Sting MX3 (Red Caps on the caliper)

Reference: SH-B010/BK

Rear Disc Guard CNC Black Talaria Sting MX3 / Sur-Ron LB-X

Reference: LW-FUNNEL-10ML

Lewis 10ml Oil Funnel

Stylish add-on to the Lewis bleed kit. CNC machined.

Reference: 35530-56A30-000

Complete Rear Brake kit Magura MT5E Black Talaria / Sur-Ron / E-Ride

The radial design of the brake master ensures low friction, reducing transmission losses. It also enables the conversion of (small/large) transmission ratios, which improves modulation and control. The 4-piston brake calliper forged in one piece has a high degree of rigidity, resulting in outstanding braking force and the best possible modulation.

Reference: 98-36138-K001

Hayes Dominion Replacement Brake Hose (200cm) With Banjo Kit

Hayes proprietary hose kit is reinforced with Kevlar for strength and durability. Kit includes: 200cm rear hose (can be cut shorter to use as a front hose) and all fittings.

Reference: SH-B020

Front Floating Brake Disc 220mm x 2.3mm Talaria Sting MX3 / MX4 / XXX / Sur-Ron / Segway X260

Direct fit upgrade floating disc for a xXx / MX4 bike!

Reference: SH-B024

Front 250mm Oversized Brake Adapter For Fastace / Factory / KKE / RST Fork

Required to run oversized 250mm brake disc.

Reference: LW-LP37

Lewis LP Series Semi-Metallic Brake Pads for LH4 Calipers

Lewis LP series brake pads offers a stronger braking performance in low-speed conditions, Commonly known as user friendly brake pads that are multipurpose. Good in wet and/or dry conditions.

Reference: DB007W

Front Brake Disc Galfer Wave Oversize 223mm Talaria / Sur-Ron / Segway

223mm fixed-mount Galfer rotor for mountain biking. Every high-quality, Galfer-patented Wave rotor is made from a proprietary mix of virgin high carbon 420 stainless steel, laser cut (never stamped), double disc-parallel ground to assure perfect parallel flatness and heat treated to each specific application. Seamlessly replaces stock rotor. Full...

Reference: SH-B025

Front 250mm Oversized Brake Adapter For DNM Fork

Required to run oversized 250mm brake disc.

Reference: LW-LH4-002/SI

Lewis LH4 4-Pistons Hydraulic Brake Set (Front & Rear) Silver

Reference: SH-B032

Rear Disc Guard CNC Black Sur-Ron LB-X / Segway X260

Material: 6061 T6 Aluminum. Surface: Anodized. Prevent brake disc collision. Protect your rear rotor from rocks and stumps. The all CNC billet aluminum design replaces the original cast aluminum caliper mount for more strength and longevity.  Rear spacer catch is slot cut to allow for easier rear wheel removal. Made to fit a 203mm disc, it does not...