Reference: NU-TAL001/BK
Plug & Ride Kit for Talaria Sting MX3 and MX4. Up to 30% more power оn standard 60V battery and up to 300% on 72V battery.
Reference: NU-TAL001/BL
Plug & Ride Kit for Talaria Sting MX3 and MX4. Up to 30% more power оn standard 60V battery and up to 300% on 72V battery. Installation guide.
Reference: NU-TAL001/OR
Plug & Ride Kit for Talaria Sting MX3 and MX4. Up to 30% more power оn standard 60V battery and up to 300% on 72V battery.
Reference: NU-TAL001/RE
Plug & Ride Kit for Talaria Sting MX3 and MX4. Up to 30% more power оn standard 60V battery and up to 300% on 72V battery.
Reference: NU-TAL001/GR
Plug & Ride Kit for Talaria Sting MX3 and MX4. Up to 30% more power оn standard 60V battery and up to 300% on 72V battery.
Reference: NU-TAL001/AL
Plug & Ride Kit for Talaria Sting MX3 and MX4. Up to 30% more power оn standard 60V battery and up to 300% on 72V battery.
Reference: 51010-56A00-000
Talaria OEM Replacement part.
Reference: GS-030
There’s a time for a kill switch, such as when you want to ride in stealth mode after dark. And then there are times when you’re riding in the dark depths of the and you need a well-lit path to lead you to your destination. That’s where the GritShift Blazer LED Light Bar Headlight comes in handy. This headlight is even better than the Blinder we had...
Reference: GS-031
Riding at night just got a whole lot easier and safer. This time you’re going to see that pothole before it wrecks your tire. Score one for you! The GritShift Blinder LED Light Bar Headlight not only increases nighttime visibility, but it also makes your bike look like it belongs to a pro – because it does. Despite its slim design, this LED Light Bar is a...
Reference: 51080-56A00-000
Talaria OEM Replacement part.
Reference: GS-029
Let's face it. You don't always need your headlights on. Why waste your battery? With the Halo Kill Switch by GritShift, you can quickly and easily control your lights and conserve your battery. Without having to take your hand off the handlebar, simply turning them off and on with the push of a button! When you want to improve your stealth abilities, the...
Reference: NU-CDCASE2
Nucular Replacement parts.
Reference: NU-CTHR
Nucular Replacement parts. Wired for a Nucular screen, will require to be re-wired for any other controller brand.
Reference: NU-CTALAD
Nucular Replacement parts.
Reference: NU-CBLE
Module for configuring the controller via Android and iOS apps. It can be used instead of the On-board computer. It connects to the CAN-bus. If you order the controller and the module, a 1.2 meter long (47 inch) CAN wire (PHD-JWPF) will be included in the controller. If in addition to the module, the kit will include an On-Board computer, you need to...
Reference: 50170-56000-000
Talaria OEM Replacement part.
Reference: 50400-56000-000
Talaria OEM Replacement part.
Reference: 50030-54001-000
Talaria OEM Replacement part.
Reference: 14005-54000-000
Throttle wire adaptor allowing to use Talaria Sting MX4/MX5 and X3 (green connector) on the Talaria Sting MX3 (square connectors)
Reference: 50300-56C00-000
This display will ONLY fit the MX5 / TL5500 or XXXPRO / TL2500PRO bikes. Please do not order for any other models as it will not work.
Reference: NU-CSURKIT
Wire extensions with bolts and nuts. For connection P24F controller to stock motor of Sur-Ron Light Bee. Also suitable as extension cords when installing the ChiBattery 72V on the Talaria XXX.
Reference: NU-CCANPHD-40cm
Wire for connection to the CAN-bus of the On-board computer, uLight, BMS and other devices from Nucular. Crimped on both sides with PHD 2.0 6P connectors. Three different lengths.
Reference: NU-CCANPHD-120cm
Wire for connection to the CAN-bus of the On-board computer, uLight, BMS and other devices from Nucular. Crimped on both sides with PHD 2.0 6P connectors. Three different lengths.
Reference: NU-CCANPHD-200cm
Wire for connection to the CAN-bus of the On-board computer, uLight, BMS and other devices from Nucular. Crimped on both sides with PHD 2.0 6P connectors. Three different lengths.
Reference: NU-CCCOVER
Plastic covers to protect wires coming in/out of the Nucular Controller. Sold as a set (upper and lower piece)
Reference: NU-TALCDKIT-TAL
Fork stem mount kit, with Gopro style extension for Talaria bikes
