- -10%
Reference: 03134-00010-000
Swing arm Axle tool for the Talaria X3 Concept. This tool is required to remove the swing arm for a belt change.
Reference: SR-HA029
Anodized 6061 T6 aluminum Handlebar Stem. Fixed directly on the upper crown so the installation is stronger. Including: 1pc Handlebar Bracket (With 4 screws)
Reference: 50400-56000-000
Talaria OEM Replacement part.
Reference: NU-CCANPHD-200cm
Wire for connection to the CAN-bus of the On-board computer, uLight, BMS and other devices from Nucular. Crimped on both sides with PHD 2.0 6P connectors. Three different lengths.
Reference: 50300-56C00-000
This display will ONLY fit the MX5 / TL5500 or XXXPRO / TL2500PRO bikes. Please do not order for any other models as it will not work.
Reference: NU-CDCASE2
Nucular Replacement parts.
Reference: 50170-56000-000
Talaria OEM Replacement part.
Reference: 14005-54000-000
Throttle wire adaptor allowing to use Talaria Sting MX4/MX5 and X3 (green connector) on the Talaria Sting MX3 (square connectors)
Reference: NU-CBLE
Module for configuring the controller via Android and iOS apps. It can be used instead of the On-board computer. It connects to the CAN-bus. If you order the controller and the module, a 1.2 meter long (47 inch) CAN wire (PHD-JWPF) will be included in the controller. If in addition to the module, the kit will include an On-Board computer, you need to...