- -10%
Talaria OEM Replacement part.
Reference: 32010-56000-000
Front fender for Talaria Sting, Sur-Ron Light Bee and Segway X260. Direct fit with DNM / KKE / Fastace fork. Note! This fender is a direct fit for the DNM volcano, KKE, Fastace & Talaria MX fork only! Doesn't work with RST. Custom fender, precision-drilled, includes stainless steel mounting hardware.
Reference: SH-B021
Oversized upgrade floating disc for any bike, will require the proper caliper spacers separately. Significant Brake upgrade over stock rotors.
Reference: TL-WT001
Complete Supermotor Wheel kit including everything needed for Talaria Sting MX4. Black rims with silver spokesFront tire dimension ; 70-90/17Rear tire dimension ; 90-80/1740T sprocket with matching chain220mm front and rear rotors Will fit the Talaria Sting MX3 but requires to swap out the discs for the 203mm (not included).
Reference: 31135-5600Z-000
Talaria OEM Replacement part.
Reference: 35470-56A70-000
Talaria OEM Replacement part.
Reference: NU-CSURKIT
Wire extensions with bolts and nuts. For connection P24F controller to stock motor of Sur-Ron Light Bee. Also suitable as extension cords when installing the ChiBattery 72V on the Talaria XXX.
Reference: 50030-54001-000
Talaria OEM Replacement part.
Reference: NU-CTHR
Nucular Replacement parts. Wired for a Nucular screen, will require to be re-wired for any other controller brand.
Reference: NU-CTALAD
Nucular Replacement parts.
Reference: NU-CCANPHD-40cm
Wire for connection to the CAN-bus of the On-board computer, uLight, BMS and other devices from Nucular. Crimped on both sides with PHD 2.0 6P connectors. Three different lengths.
Reference: NU-CBLE
Module for configuring the controller via Android and iOS apps. It can be used instead of the On-board computer. It connects to the CAN-bus. If you order the controller and the module, a 1.2 meter long (47 inch) CAN wire (PHD-JWPF) will be included in the controller. If in addition to the module, the kit will include an On-Board computer, you need to...
Reference: NU-TALCDKIT-TAL
Fork stem mount kit, with Gopro style extension for Talaria bikes
Reference: NU-CCANPHD-200cm
Wire for connection to the CAN-bus of the On-board computer, uLight, BMS and other devices from Nucular. Crimped on both sides with PHD 2.0 6P connectors. Three different lengths.
Reference: 14005-54000-000
Throttle wire adaptor allowing to use Talaria Sting MX4/MX5 and X3 (green connector) on the Talaria Sting MX3 (square connectors)