Reference: 43751-56A00-000
Talaria OEM Replacement part.
Reference: 35591-56A70-000
Talaria OEM Replacement part.
Reference: 250785-12
Made with organic materials that are blended and bound together using a resin. The compounds do include small amounts of metal to improve the braking formula but though this is a mined material the pads are largely organic so we stop short of labeling it a semi-metallic pad. The perfect blend of low noise, high power that rotor friendly to boot Priced per...
Reference: 32881-56000-000
Talaria OEM Replacement part.
Reference: 50300-56C00-000
This display will ONLY fit the MX5 / TL5500 or XXXPRO / TL2500PRO bikes. Please do not order for any other models as it will not work.
Reference: 14005-54000-000
Throttle wire adaptor allowing to use Talaria Sting MX4/MX5 and X3 (green connector) on the Talaria Sting MX3 (square connectors)
Reference: 50030-54001-000
Talaria OEM Replacement part.
Reference: 50170-56000-000
Talaria OEM Replacement part.
Reference: NU-CSURKIT
Wire extensions with bolts and nuts. For connection P24F controller to stock motor of Sur-Ron Light Bee. Also suitable as extension cords when installing the ChiBattery 72V on the Talaria XXX.
Reference: NU-CBLE
Module for configuring the controller via Android and iOS apps. It can be used instead of the On-board computer. It connects to the CAN-bus. If you order the controller and the module, a 1.2 meter long (47 inch) CAN wire (PHD-JWPF) will be included in the controller. If in addition to the module, the kit will include an On-Board computer, you need to...
Reference: NU-TALCDKIT-TAL
Fork stem mount kit, with Gopro style extension for Talaria bikes
Reference: NU-CTALAD
Nucular Replacement parts.
Reference: NU-CDCASE2
Nucular Replacement parts.
Reference: NU-CCANPHD-40cm
Wire for connection to the CAN-bus of the On-board computer, uLight, BMS and other devices from Nucular. Crimped on both sides with PHD 2.0 6P connectors. Three different lengths.
Reference: NU-CTHR
Nucular Replacement parts. Wired for a Nucular screen, will require to be re-wired for any other controller brand.
Reference: NU-CCANPHD-200cm
Wire for connection to the CAN-bus of the On-board computer, uLight, BMS and other devices from Nucular. Crimped on both sides with PHD 2.0 6P connectors. Three different lengths.
