Reference: 31820-54040-000
Factory-made high-quality pedal kit for Talaria X3 (xxx) designed for perfect fitment. Crafted with precision by the original manufacturer, this kit allows you to easily convert your electric dirt bike to a pedal-assist setup or meet local regulations where pedals are required.
Reference: 11-0009
Ideal to prevent the tire from slipping on the rim when running low tire pressure.
Reference: TL-FPSB001
For installation if you have the V2 foot peg holders: drill the third hole closest to the rear tire on both foot peg holders with a 12mm drill bit (preferred) or a 1/2" drill bit (if you don't have a 12mm drill bit).
Reference: NU-CCANPHD-120cm
Wire for connection to the CAN-bus of the On-board computer, uLight, BMS and other devices from Nucular. Crimped on both sides with PHD 2.0 6P connectors. Three different lengths.
Reference: NU-TALCDKIT-TAL
Fork stem mount kit, with Gopro style extension for Talaria bikes
Reference: NU-CTHR
Nucular Replacement parts. Wired for a Nucular screen, will require to be re-wired for any other controller brand.
Reference: NU-CSURKIT
Wire extensions with bolts and nuts. For connection P24F controller to stock motor of Sur-Ron Light Bee. Also suitable as extension cords when installing the ChiBattery 72V on the Talaria XXX.
Reference: 50030-54001-000
Talaria OEM Replacement part.
Reference: NU-CDCASE2
Nucular Replacement parts.
Reference: NU-CCANPHD-40cm
Wire for connection to the CAN-bus of the On-board computer, uLight, BMS and other devices from Nucular. Crimped on both sides with PHD 2.0 6P connectors. Three different lengths.
Reference: 50300-56C00-000
This display will ONLY fit the MX5 / TL5500 or XXXPRO / TL2500PRO bikes. Please do not order for any other models as it will not work.
Reference: 14005-54000-000
Throttle wire adaptor allowing to use Talaria Sting MX4/MX5 and X3 (green connector) on the Talaria Sting MX3 (square connectors)
Reference: 50400-56000-000
Talaria OEM Replacement part.
Reference: NU-CCANPHD-200cm
Wire for connection to the CAN-bus of the On-board computer, uLight, BMS and other devices from Nucular. Crimped on both sides with PHD 2.0 6P connectors. Three different lengths.
