Replacement fork seal for the Talaria Factory Fork
Reference: TL-FA002
Shock protector for the Talaria Sting. The sand and mud from the back wheel can damage the rear suspension over time and this is the perfect part to protect it.
Reference: 32010-56000-000
Front fender for Talaria Sting, Sur-Ron Light Bee and Segway X260. Direct fit with DNM / KKE / Fastace fork. Note! This fender is a direct fit for the DNM volcano, KKE, Fastace & Talaria MX fork only! Doesn't work with RST. Custom fender, precision-drilled, includes stainless steel mounting hardware.
Reference: 35591-56000-000
Talaria OEM Replacement part.
Reference: SR-HA024/AL
Stem Lock made with 6061 T6 aluminum with anodized surface for Talaria / Sur-Ron / Segway Electric Dirt Bike.
Reference: GS-030
There’s a time for a kill switch, such as when you want to ride in stealth mode after dark. And then there are times when you’re riding in the dark depths of the and you need a well-lit path to lead you to your destination. That’s where the GritShift Blazer LED Light Bar Headlight comes in handy. This headlight is even better than the Blinder we had...
Reference: FX-009
Include Drop-Crown (required) and disc brake shim sold separately by Fox. ATTENTION! ABSOLUTELY NO WARRANTY ON FOX PRODUCTS USED ON TALARIA / SUR-RON / SEGWAY. Target locked on the top step of the podium, developed in the crucible of World Cup competition, the 40 is the definitive DH race fork. A Grip2 damper with VVC, and an updated EVOL air spring,...
Reference: TL-S014/BL
Attention! Only suitable for DNM fork.
Reference: FX-004
Attention! Fox SLS / Steel spring sold separately. Please choose between 450,500 and 550 lbs. Include required bushings for Talaria / Sur-Ron / Segway. ATTENTION! ABSOLUTELY NO WARRANTY ON FOX PRODUCTS USED ON TALARIA / SUR-RON / SEGWAY. Everyone loves a well performing coil shock, as good as air suspension is, nothing can quite compete with the way a...
Reference: MP-08-0768
The best tool on the market to remove bearing races easily
Reference: 40499-56005-000
Reference: TL-S010
This linkage will raise the seat height by 0.8'' (20mm). Recommended for taller riders.
Reference: FX-015
Featuring a hard-wearing steel construction, this mountain bike (MTB) rear shock spring offers excellent durability as you conquer every trail-riding adventure. All standard steel springs are black and are marked with their spring rate in lbs/in (in 50lb increments) and the total travel of the spring itself. Standard black springs should only be paired...
Reference: FX-012
Featuring a hard-wearing steel construction, this mountain bike (MTB) rear shock spring offers excellent durability as you conquer every trail-riding adventure. All standard steel springs are black and are marked with their spring rate in lbs/in (in 50lb increments) and the total travel of the spring itself. Standard black springs should only be paired...
Reference: WR-018/BK
** This is the V2 version of this linkage. It is built stronger and reinforced compared to the V1. Made from 7075T6 Billet Aluminum. Weights less than Other Aftermarket Risers. Available in Red, Blue or Black
Reference: FX-013
Featuring a hard-wearing steel construction, this mountain bike (MTB) rear shock spring offers excellent durability as you conquer every trail-riding adventure. All standard steel springs are black and are marked with their spring rate in lbs/in (in 50lb increments) and the total travel of the spring itself. Standard black springs should only be paired...
Reference: 40486-56002-000
Does not include set bolts. Needs to be purchased separately!
Reference: SR-S009
Material: 6061 T6 Aluminum. Surface: Anodized. Reinforced rear suspension, so that the suspension part can bear huge pressure during driving. The overall thickness is increased to 22mm, and two reinforcing ribs are added for higher strength. Milled and hollowed design enhances the appearance.
Reference: 191-38304-A101
An engineering masterpiece The Dorado is our most advanced downhill fork ever! It’s built with 7050 legs, an inverted construction, dual-chamber air springs, and TPC+ damping with independent high-and low-speed compression. Not to mention, hydraulic bottom-out and top-out features and Manitou’s patented HexLock 20mm thru-axle.
Reference: TL-S012
Attention! One kit includes 1x oil seal and 1x dust seal from highest quality materials as usual with SKF. Requires 2x kits to rebuild a complete fork!
Replacement fork seal for the Talaria Factory Fork
