Reference: NU-TAL001/RE
Plug & Ride Kit for Talaria Sting MX3 and MX4. Up to 30% more power оn standard 60V battery and up to 300% on 72V battery.
Reference: 32871-56001-000
Talaria OEM Replacement part. Plastic piece only! Must re-use OEM components from the previous cover to be re-installed. (Lock, Pins, Talaria sticker not included)
Reference: 31211-YQ2B-0000
Front fender for Talaria Sting, Sur-Ron Light Bee and Segway X260. Direct fit with DNM / KKE / Fastace fork. Note! This fender is a direct fit for the DNM volcano, KKE, Fastace & Talaria MX fork only! Doesn't work with RST. Custom fender, precision-drilled, includes mounting hardware.
Reference: 34012-56A10-000
OEM Talaria graphic kit made for the Sting R MX4. Available in Blue, Orange and Tower Grey
Reference: TN-001
Nero C is a fork designed for those who love the feeling of a coil spring and want a fit-and-forget fork for their local bike park. The damper is identical to that used in the Nero R, incorporating high speed compression, low speed compression and rebound adjustment. Instead of the 3Air system, the Nero C employs a coil spring with tool-free preload...
Reference: FX-012
Featuring a hard-wearing steel construction, this mountain bike (MTB) rear shock spring offers excellent durability as you conquer every trail-riding adventure. All standard steel springs are black and are marked with their spring rate in lbs/in (in 50lb increments) and the total travel of the spring itself. Standard black springs should only be paired...
Reference: TL-S010
This linkage will raise the seat height by 0.8'' (20mm). Recommended for taller riders.
Reference: SR-S010
6061 T6 Aluminum Made. Anodized Surface. The new bearing oil seal replaces the original sealing gasket, and the integrated design is convenient for disassembly and assembly. Local thickening to maximize product strength.
Reference: FX-003
Include required bushings for Talaria / Sur-Ron / Segway. ATTENTION! ABSOLUTELY NO WARRANTY ON FOX PRODUCTS USED ON TALARIA / SUR-RON / SEGWAY. Combining ultra-plush coil-like comfort and incredible damping prowess with the light weight of an air spring and an unmatched level of tunability, the Float X2 brings new levels of control and performance to...
Reference: TL-S002
Quality suspension at an affordable price. The fork is adjusted for 170lbs but is also convenient for heavier rider. This is a very good upgrade over RST, DNM and KKE forks. Attention! Since late 2022 the fork as been improved with air valve instead of compression knob. This allow to make the fork much stiffer than the 1.0 version. Length : 27.5 Travel :...
Reference: FX-013
Featuring a hard-wearing steel construction, this mountain bike (MTB) rear shock spring offers excellent durability as you conquer every trail-riding adventure. All standard steel springs are black and are marked with their spring rate in lbs/in (in 50lb increments) and the total travel of the spring itself. Standard black springs should only be paired...
Reference: SR-S009
Material: 6061 T6 Aluminum. Surface: Anodized. Reinforced rear suspension, so that the suspension part can bear huge pressure during driving. The overall thickness is increased to 22mm, and two reinforcing ribs are added for higher strength. Milled and hollowed design enhances the appearance.
Reference: 40492-56005-000
Replacement fork seal for the Talaria Factory Fork
Reference: FX-011
Featuring a hard-wearing steel construction, this mountain bike (MTB) rear shock spring offers excellent durability as you conquer every trail-riding adventure. All standard steel springs are black and are marked with their spring rate in lbs/in (in 50lb increments) and the total travel of the spring itself. Standard black springs should only be paired...
Reference: FX-014
Featuring a hard-wearing steel construction, this mountain bike (MTB) rear shock spring offers excellent durability as you conquer every trail-riding adventure. All standard steel springs are black and are marked with their spring rate in lbs/in (in 50lb increments) and the total travel of the spring itself. Standard black springs should only be paired...
Reference: 40486-56005-000
Does not include set bolt. Need to be purchased separately!
Reference: 40480-56002-000
Lightweight Design-FASTACE is a lightweight spring damper designed and manufactured for fast downhill bikes. Its inner and outer tubes, upper and lower plates, left and right legs are made of aluminum alloy with high strength and light weight, and the interior is designed with spring and oil pressure damping. Hydraulic Damping System--The hydraulic...
Reference: MP-08-0669
Proper tool to install new races, fits most ebikes on the market
Reference: OSB-42FCV
Taking the mytic name of the fork that equipped the mountain bikes of Nicolas Vouilloz and Anne-Caroline Chausson during their great years in the downhill world championships, the Bos Suspension Obsys 42 FCV fork has made a very noticed arrival. Our new Obsys 42 FCV dual crown fork shows its impressive characteristics right away. It's built to win.
