- New
Reference: TL-S011
Rear Suspension Linkage +1.6'' (40mm) CNC Black Sur-Ron LB-X / Segway X260
This linkage will raise the seat height by 1.6'' (40mm). Recommended for taller riders
This linkage will raise the seat height by 0.8'' (20mm). Recommended for taller riders.
Reference: TL-S011
This linkage will raise the seat height by 1.6'' (40mm). Recommended for taller riders
Reference: SR-S010
6061 T6 Aluminum Made. Anodized Surface. The new bearing oil seal replaces the original sealing gasket, and the integrated design is convenient for disassembly and assembly. Local thickening to maximize product strength.
Reference: 191-38304-A101
An engineering masterpiece The Dorado is our most advanced downhill fork ever! It’s built with 7050 legs, an inverted construction, dual-chamber air springs, and TPC+ damping with independent high-and low-speed compression. Not to mention, hydraulic bottom-out and top-out features and Manitou’s patented HexLock 20mm thru-axle.
Reference: TL-S002
Quality suspension at an affordable price. The fork is adjusted for 170lbs but is also convenient for heavier rider. This is a very good upgrade over RST, DNM and KKE forks. Attention! Since late 2022 the fork as been improved with air valve instead of compression knob. This allow to make the fork much stiffer than the 1.0 version. Length : 27.5 Travel :...
Reference: 40480-56000-000
Fork RST Killah 27.5 fron fork for Talaria sting / Sur-Ron LB-X and Segway X260.
Reference: 191-37873-A101
Once again, the Dorado is available with a coil option. The new Dorado Comp features the same 37mm chassis as the Expert, but with a more set it and forget it vibe. The coil spring provides a smooth consistent feel 100% of the time with 0% of any hassle. On the damping side of things, our ABS+ Damper offers a great adjustment range, terrific reliability,...
Reference: 40480-56002-000
Lightweight Design-FASTACE is a lightweight spring damper designed and manufactured for fast downhill bikes. Its inner and outer tubes, upper and lower plates, left and right legs are made of aluminum alloy with high strength and light weight, and the interior is designed with spring and oil pressure damping. Hydraulic Damping System--The hydraulic...
Reference: 40492-56005-000
Replacement fork seal for the Talaria Factory Fork
Reference: SR-S005
Is there play in your rear suspension? Replace those loose and gritty suspension linkage bearings with a DirtyBike off road bearing kit. Kit includes six precision needle bearings and fits all Surron Light Bee and Segway X260/160.
Reference: OSB-42FSV150
Spring & Mounting Bushings included (100% bolt-on) - - - Have a look at our new Stoy 3 model 2022 which will radically transform the behavior of your bike. The Stoy 3 is a lightweight, compact, high performance shock made for enduro, freeride and downhill riding. It offers a wide range of settings, low/high speed compression and rebound, it benefits...
Reference: FX-012
Featuring a hard-wearing steel construction, this mountain bike (MTB) rear shock spring offers excellent durability as you conquer every trail-riding adventure. All standard steel springs are black and are marked with their spring rate in lbs/in (in 50lb increments) and the total travel of the spring itself. Standard black springs should only be paired...
Reference: SR-S009
Material: 6061 T6 Aluminum. Surface: Anodized. Reinforced rear suspension, so that the suspension part can bear huge pressure during driving. The overall thickness is increased to 22mm, and two reinforcing ribs are added for higher strength. Milled and hollowed design enhances the appearance.
Reference: 40486-56005-000
Reference: FX-011
Featuring a hard-wearing steel construction, this mountain bike (MTB) rear shock spring offers excellent durability as you conquer every trail-riding adventure. All standard steel springs are black and are marked with their spring rate in lbs/in (in 50lb increments) and the total travel of the spring itself. Standard black springs should only be paired...
Reference: RS-002-27536
More than 20 years ago, BoXXer changed the DH world when it hit the scene, featuring Charger™ 2.1 damper for unrivaled control between the tape. Ultra-low friction SKF wiper seals and race-proven Maxima Plush damping fluid all work overtime to reduce friction, noise, and provide lasting fork performance all the way to the finish corral.
Reference: 42600-56000-000
Talaria OEM Replacement part.
@CUSTOMER_NAME@
@AUTHOR_PROFILE@ @COMMENT_ISO_COUNTRY@@COMMENT_TITLE@
@COMMENT_COMMENT@