Does not include set bolt. Need to be purchased separately!
Reference: 32841-56000-000
Talaria OEM Replacement part.
Reference: DB007W
223mm fixed-mount Galfer rotor for mountain biking. Every high-quality, Galfer-patented Wave rotor is made from a proprietary mix of virgin high carbon 420 stainless steel, laser cut (never stamped), double disc-parallel ground to assure perfect parallel flatness and heat treated to each specific application. Seamlessly replaces stock rotor. Full...
Reference: 01-04190
A versatile performer with a tough nylon carcass and raised dimpled knobs that work well in a variety of terrain. Narrow knobby configuration means less of an environmental foot print on the trail. 4 ply rated. DOT approved. Not intended for extended highway use. All sizes will work for front or rear fitment. 2.85kg / 6.28 lbs
Reference: NU-T001/BK
Plug & Ride Kit for Talaria Sting MX3 and MX4. Up to 30% more power оn standard 60V battery and up to 300% on 72V battery.
Reference: 32871-56001-000
Talaria OEM Replacement part. Plastic piece only! Must re-use OEM components from the previous cover to be re-installed. (Lock, Pins, Talaria sticker not included)
Reference: TL-S011
This linkage will raise the seat height by 1.6'' (40mm). Recommended for taller riders
Reference: 40486-56002-000
Does not include set bolts. Needs to be purchased separately!
Reference: FX-011
Featuring a hard-wearing steel construction, this mountain bike (MTB) rear shock spring offers excellent durability as you conquer every trail-riding adventure. All standard steel springs are black and are marked with their spring rate in lbs/in (in 50lb increments) and the total travel of the spring itself. Standard black springs should only be paired...
Reference: 40492-56002-000
Replacement fork seal for the Fastace Fork.
Reference: TL-S002
Quality suspension at an affordable price. The fork is adjusted for 170lbs but is also convenient for heavier rider. This is a very good upgrade over RST, DNM and KKE forks. Attention! Since late 2022 the fork as been improved with air valve instead of compression knob. This allow to make the fork much stiffer than the 1.0 version. Length : 27.5 Travel :...
Reference: 191-38304-A101
An engineering masterpiece The Dorado is our most advanced downhill fork ever! It’s built with 7050 legs, an inverted construction, dual-chamber air springs, and TPC+ damping with independent high-and low-speed compression. Not to mention, hydraulic bottom-out and top-out features and Manitou’s patented HexLock 20mm thru-axle.
Reference: OSB-42FSV150
Spring & Mounting Bushings included (100% bolt-on) - - - Have a look at our new Stoy 3 model 2022 which will radically transform the behavior of your bike. The Stoy 3 is a lightweight, compact, high performance shock made for enduro, freeride and downhill riding. It offers a wide range of settings, low/high speed compression and rebound, it benefits...
Reference: FX-009
Include Drop-Crown (required) and disc brake shim sold separately by Fox. ATTENTION! ABSOLUTELY NO WARRANTY ON FOX PRODUCTS USED ON TALARIA / SUR-RON / SEGWAY. Target locked on the top step of the podium, developed in the crucible of World Cup competition, the 40 is the definitive DH race fork. A Grip2 damper with VVC, and an updated EVOL air spring,...
Reference: TL-S010
This linkage will raise the seat height by 0.8'' (20mm). Recommended for taller riders.
Reference: SR-S009
Material: 6061 T6 Aluminum. Surface: Anodized. Reinforced rear suspension, so that the suspension part can bear huge pressure during driving. The overall thickness is increased to 22mm, and two reinforcing ribs are added for higher strength. Milled and hollowed design enhances the appearance.
Reference: SR-S010
6061 T6 Aluminum Made. Anodized Surface. The new bearing oil seal replaces the original sealing gasket, and the integrated design is convenient for disassembly and assembly. Local thickening to maximize product strength.
Reference: FX-003
Include required bushings for Talaria / Sur-Ron / Segway. ATTENTION! ABSOLUTELY NO WARRANTY ON FOX PRODUCTS USED ON TALARIA / SUR-RON / SEGWAY. Combining ultra-plush coil-like comfort and incredible damping prowess with the light weight of an air spring and an unmatched level of tunability, the Float X2 brings new levels of control and performance to...
Reference: MP-08-0768
The best tool on the market to remove bearing races easily
Reference: SR-S007
Mounting hardware for aftermarket shock on Talaria Sting, Sur-Ron LB-X and Segway X260.
Reference: 40492-56005-000
Replacement fork seal for the Talaria Factory Fork
Does not include set bolt. Need to be purchased separately!
