Rear Floating Brake Disc 220mm x 2.3mm Talaria Sting MX3 / MX4 / XXX

Reference: 95-36115-K001-D

Complete Front Brake Kit HAYES Dominion A4 Bronze

Dominion's master cylinder is factory tuned for the shortest dead stroke possible and a crisp bite point. The Dominion A4 caliper utilizes four pistons in the most structurally rigid design possible. It features a cold-forged caliper and KingPin structural pad retention bolt that increases stiffness. With a motorsports-inspired Two-Stroke dual port bleed...

Reference: SH-B031

Rear Disc Guard CNC / Dual Caliper Bracket Talaria Sting MX3 / Sur-Ron / Segway

Material: 6061 T6 Aluminum. Surface: Anodized. Prevent brake disc collision. Protect your rear rotor from rocks and stumps. The all CNC billet aluminum design replaces the original cast aluminum caliper mount for more strength and longevity.  Rear spacer catch is slot cut to allow for easier rear wheel removal. Made to fit a 203mm disc, it does not...

Reference: SH-B024

Front 250mm Oversized Brake Adapter For Fastace / Factory / KKE / RST Fork

Required to run oversized 250mm brake disc.

Reference: SH-B012/BK

Foldable Brake Levers CNC Black (2) Talaria / Sur-Ron / Segway

Folding CNC Brake lever made of 6061 T6 aluminum with anodized black surface. Stronger and lightweight. Attention! Talaria Sting MX4 - Only compatible with LBN Brake system similar to the Sting MX3 (Red Caps on the caliper)

Reference: BFD426G1053

Brake pads Galfer Standard 1053 Talaria / Sur-Ron / Segway (OEM Caliper)

Suitable for all conditions. Perfectly balanced power and durability. Progressive and consistent braking with better feel. Low noise. Less wear on the brake rotors.

Reference: DB007W

Front Brake Disc Galfer Wave Oversize 223mm Talaria / Sur-Ron / Segway

223mm fixed-mount Galfer rotor for mountain biking. Every high-quality, Galfer-patented Wave rotor is made from a proprietary mix of virgin high carbon 420 stainless steel, laser cut (never stamped), double disc-parallel ground to assure perfect parallel flatness and heat treated to each specific application. Seamlessly replaces stock rotor. Full...

Reference: SH-B016

Rear Oversized Floating Brake Disc 250mm x 2.3mm Talaria Sting MX3 / MX4 / XXX

Oversized 250mm upgrade floating disc for Talaria MX3 / MX4 / xXx, will require the proper caliper spacers separately. Significant Brake upgrade over stock rotors.

Reference: 250789-06

Brake Pads Koolstop Aero-Kool Organic Talaria / Sur-Ron / Segway (OEM Caliper)

Our newest Aero Kool pads are made with a forged aluminum cooling pinned backing plate and a high performance organic compound. The new pads greatly reduce heat build up in the braking system and provide superior, lasting brake power

Reference: SB002

Brake Disc Adapter Galfer 203-223mm

This adapter will allow you to run a bicycle rotor up to 20mm larger than standard size. This is typically used to run the 203 / 223mm Galfer USA oversize brake rotor.

Reference: 95-36115-K003-D

Complete front brake kit HAYES Dominion A4 Black

Introducing the all-new, Stealth Dominion, our award-winning Hayes Dominion A4 brakes are back – adding even more ways for you to stop! Dominion's master cylinder is factory tuned for the shortest dead stroke possible and a crisp bite point. The Dominion A4 caliper utilizes four pistons in the most structurally rigid design possible. It features a...

Reference: SH-B010/AL

Rear Disc Guard CNC Aluminium Talaria Sting MX3 / Sur-Ron LB-X

Reference: 95-36115-K002-D

Complete Rear Brake Kit HAYES Dominion A4 Bronze

Dominion's master cylinder is factory tuned for the shortest dead stroke possible and a crisp bite point. The Dominion A4 caliper utilizes four pistons in the most structurally rigid design possible. It features a cold-forged caliper and KingPin structural pad retention bolt that increases stiffness. With a motorsports-inspired Two-Stroke dual port bleed...

Reference: 43751-56A00-000

10mm Brake Caliper Spacer (for 220mm Disc) Talaria Sting / X3 (1)

Talaria OEM Replacement part.

Reference: SH-B016

Rear Disc Guard CNC Black Talaria Sting MX3 / Sur-Ron LB-X

Material: 6061 T6 Aluminum. Surface: Anodized. Prevent brake disc collision. Protect your rear rotor from rocks and stumps. The all CNC billet aluminum design replaces the original cast aluminum caliper mount for more strength and longevity.  Rear spacer catch is slot cut to allow for easier rear wheel removal. Made to fit a 203mm disc, it does not...

Reference: 98-36141-K001-D

Brake Pads Hayes Dominion A4 Sintered (Hayes A4 Caliper)

The good friction. Speed and confidence come with better braking. Refresh or update the best brakes in the world with some new pads! Sintered metallic friction material provides maximum stopping power in wet and dry conditions.

Reference: SH-B010/BK

Rear Disc Guard CNC Black Talaria Sting MX3 / Sur-Ron LB-X