203mm fixed-mount Galfer rotor for mountain biking. Every high-quality, Galfer-patented Wave rotor is made from a proprietary mix of virgin high carbon 420 stainless steel, laser cut (never stamped), double disc-parallel ground to assure perfect parallel flatness and heat treated to each specific application. Seamlessly replaces stock rotor. Full instructions provided along with any technical help needed! Precision made in our Galfer factory in Spain.
Reference: 0312-0380
Designed to offer performance in a wide variety of terrains, the Geomax MX53 excels in hard-packed track conditions while also offering greater versatility in intermediate riding conditions.
Reference: 73-3600L
In motion air is forced through multiple air intake vents, then passed through aligned vent channels in the EPS and exits out multiple rear exhaust vents, keeping you cool and comfortable
Reference: 50180-56000-000
Talaria OEM Replacement part. Only looking for the screws? We have them in the OEM shop ; 10429-56000-000
Reference: 35220-56000-000
Talaria OEM Replacement part.
Reference: 35533-56000-000
Talaria OEM Replacement part.
Reference: SH-B013/BK
Front Disc Guard made of 6061 T6 aluminum and 304 stainless steel screws for Talaria / Sur-Ron / Segway electric dirt bike.
Reference: 250785-12
Made with organic materials that are blended and bound together using a resin. The compounds do include small amounts of metal to improve the braking formula but though this is a mined material the pads are largely organic so we stop short of labeling it a semi-metallic pad. The perfect blend of low noise, high power that rotor friendly to boot Priced per...
Reference: 52110-YQ2B-0000
Replacement Brake Master Cylinder for Sur-Ron LB-X and Segway X260
Reference: SB003
This adapter will allow you to run a bicycle rotor up to 63mm larger than standard size. This is typically used to run the 223mm Galfer USA oversize brake rotor.
Reference: SH-B015
Replacement Seat fender rivets for Sur-Ron LB-X. Come in pack of 10.
Reference: DB007W
223mm fixed-mount Galfer rotor for mountain biking. Every high-quality, Galfer-patented Wave rotor is made from a proprietary mix of virgin high carbon 420 stainless steel, laser cut (never stamped), double disc-parallel ground to assure perfect parallel flatness and heat treated to each specific application. Seamlessly replaces stock rotor. Full...
Reference: SH-B012/PU
Folding CNC Brake lever made of 6061 T6 aluminum with anodized black surface. Stronger and lightweight.
Reference: 52111-YQ2B-0000
Replacement Brake Lever (2) for Sur-Ron LB-X and Segway X260.
Reference: SH-B012/BL
Folding CNC Brake lever made of 6061 T6 aluminum with anodized black surface. Stronger and lightweight.
Reference: 35533-56A03-000
Original replacements from Magura, price is for a set of 2x pads (to fit one caliper).
Reference: 341426-15
For use in mineral-based brake and hydraulic systems specifying mineral oils. Developed in collaboration with a premium OEM component manufacturer. Mineral based formula does not damage painted surfaces or carbon fiber. Low maintenance formula does not absorb moisture like DOT fluids. High boil point and minimal frequency of system bleeds. Zero-fade...
Reference: 95-36115-K001-D
Dominion's master cylinder is factory tuned for the shortest dead stroke possible and a crisp bite point. The Dominion A4 caliper utilizes four pistons in the most structurally rigid design possible. It features a cold-forged caliper and KingPin structural pad retention bolt that increases stiffness. With a motorsports-inspired Two-Stroke dual port bleed...
Reference: LW-FUNNEL-10ML
Stylish add-on to the Lewis bleed kit. CNC machined.
Reference: 35450-56A30-000
The radial design of the brake master ensures low friction, reducing transmission losses. It also enables the conversion of (small/large) transmission ratios, which improves modulation and control. The 4-piston brake calliper forged in one piece has a high degree of rigidity, resulting in outstanding braking force and the best possible modulation.
203mm fixed-mount Galfer rotor for mountain biking. Every high-quality, Galfer-patented Wave rotor is made from a proprietary mix of virgin high carbon 420 stainless steel, laser cut (never stamped), double disc-parallel ground to assure perfect parallel flatness and heat treated to each specific application. Seamlessly replaces stock rotor. Full instructions provided along with any technical help needed! Precision made in our Galfer factory in Spain.
