Reference: 14005-54000-000
Throttle wire adaptor Sting MX3 to Green Connector (XXX-MX4-MX5)
Throttle wire adaptor allowing to use Talaria Sting MX4/MX5 and X3 (green connector) on the Talaria Sting MX3 (square connectors)
Talaria OEM Replacement part. Only looking for the screws? We have them in the OEM shop ; 10429-56000-000
Reference: 14005-54000-000
Throttle wire adaptor allowing to use Talaria Sting MX4/MX5 and X3 (green connector) on the Talaria Sting MX3 (square connectors)
Reference: 22050-56000-000
Talaria OEM Replacement part.
Reference: 31820-54040-000
Factory-made high-quality pedal kit for Talaria X3 (xxx) designed for perfect fitment. Crafted with precision by the original manufacturer, this kit allows you to easily convert your electric dirt bike to a pedal-assist setup or meet local regulations where pedals are required.
Reference: 32431-54002-000
Talaria OEM Replacement part.
Reference: NU-CCANPHD-120cm
Wire for connection to the CAN-bus of the On-board computer, uLight, BMS and other devices from Nucular. Crimped on both sides with PHD 2.0 6P connectors. Three different lengths.
Reference: NU-CTALAD
Nucular Replacement parts.
Reference: NU-CCANPHD-40cm
Wire for connection to the CAN-bus of the On-board computer, uLight, BMS and other devices from Nucular. Crimped on both sides with PHD 2.0 6P connectors. Three different lengths.
Reference: 50020-56000-000
Talaria OEM Replacement part.
Reference: TA-E001
Plug and play turn signal kit with everything needed for install. Front turn signals double as bright Running Lights. License plate light: Rear turn Signal Light included. Headlight switch included, when headlight is on off position, brake light, and signals are still functional, although running lights will be turned off. Turn Signal light switch...
Reference: NU-CDCASE2
Nucular Replacement parts.
Reference: NU-CBLE
Module for configuring the controller via Android and iOS apps. It can be used instead of the On-board computer. It connects to the CAN-bus. If you order the controller and the module, a 1.2 meter long (47 inch) CAN wire (PHD-JWPF) will be included in the controller. If in addition to the module, the kit will include an On-Board computer, you need to...
Reference: 50190-56001-000
Talaria OEM Replacement part.
Reference: 50170-56000-000
Talaria OEM Replacement part.
Reference: 50400-56000-000
Talaria OEM Replacement part.
Reference: NU-TALCDKIT-TAL
Fork stem mount kit, with Gopro style extension for Talaria bikes
Reference: NU-CCCOVER
Plastic covers to protect wires coming in/out of the Nucular Controller. Sold as a set (upper and lower piece)