Nucular Replacement parts. Wired for a Nucular screen, will require to be re-wired for any other controller brand.
Reference: 03134-00010-000
Swing arm Axle tool for the Talaria X3 Concept. This tool is required to remove the swing arm for a belt change.
Reference: SH-B024
Required to run oversized 250mm brake disc.
Reference: MOT111820
Creamy and non-sticky lubricant for all chains of off road bikes and quads. Disperses deposits of sand, mud and dirt. Protects the chain in muddy and wet conditions.
Reference: NU-SUR001/RE
Plug & Ride Kit for Sur-Ron Light Bee. Up to 30% more power оn standard 60V battery and up to 300% on 72V battery.
Reference: TL-FA004
Passenger Pegs for the Talaria Sting Adjustable Foot Pegs Mount. Foldable auxiliary pegs with anti-slip knurled thread design.
Reference: 50170-56000-000
Talaria OEM Replacement part.
Reference: NU-CCANPHD-200cm
Wire for connection to the CAN-bus of the On-board computer, uLight, BMS and other devices from Nucular. Crimped on both sides with PHD 2.0 6P connectors. Three different lengths.
Reference: 14005-54000-000
Throttle wire adaptor allowing to use Talaria Sting MX4/MX5 and X3 (green connector) on the Talaria Sting MX3 (square connectors)
Reference: NU-CCCOVER
Plastic covers to protect wires coming in/out of the Nucular Controller. Sold as a set (upper and lower piece)
Reference: NU-CCANPHD-40cm
Wire for connection to the CAN-bus of the On-board computer, uLight, BMS and other devices from Nucular. Crimped on both sides with PHD 2.0 6P connectors. Three different lengths.
Reference: 50400-56000-000
Talaria OEM Replacement part.
Reference: 50030-54001-000
Talaria OEM Replacement part.
Reference: NU-CDCASE2
Nucular Replacement parts.
Reference: NU-CTALAD
Nucular Replacement parts.
Nucular Replacement parts. Wired for a Nucular screen, will require to be re-wired for any other controller brand.
