Reference: 32871-56001-000
Talaria OEM Replacement part. Plastic piece only! Must re-use OEM components from the previous cover to be re-installed. (Lock, Pins, Talaria sticker not included)
Reference: 32431-56A00-000
Talaria Sting MX4 OEM replacement rear fender. Good upgrade for Talaria Sting MX3 supplied with a smaller one.
Reference: 40622-56000-000
Talaria OEM Replacement part.
Reference: 35220-56000-000
Talaria OEM Replacement part.
Reference: NU-CTHR
Nucular Replacement parts. Wired for a Nucular screen, will require to be re-wired for any other controller brand.
Reference: NU-CCANPHD-200cm
Wire for connection to the CAN-bus of the On-board computer, uLight, BMS and other devices from Nucular. Crimped on both sides with PHD 2.0 6P connectors. Three different lengths.
Reference: 50400-56000-000
Talaria OEM Replacement part.
Reference: NU-CBLE
Module for configuring the controller via Android and iOS apps. It can be used instead of the On-board computer. It connects to the CAN-bus. If you order the controller and the module, a 1.2 meter long (47 inch) CAN wire (PHD-JWPF) will be included in the controller. If in addition to the module, the kit will include an On-Board computer, you need to...
Reference: NU-TALCDKIT-TAL
Fork stem mount kit, with Gopro style extension for Talaria bikes
Reference: NU-CCCOVER
Plastic covers to protect wires coming in/out of the Nucular Controller. Sold as a set (upper and lower piece)
Reference: NU-CTALAD
Nucular Replacement parts.
Reference: 14005-54000-000
Throttle wire adaptor allowing to use Talaria Sting MX4/MX5 and X3 (green connector) on the Talaria Sting MX3 (square connectors)
Reference: 50170-56000-000
Talaria OEM Replacement part.
Reference: NU-CCANPHD-40cm
Wire for connection to the CAN-bus of the On-board computer, uLight, BMS and other devices from Nucular. Crimped on both sides with PHD 2.0 6P connectors. Three different lengths.
