Replacement Display Talaria Sting MX5 / X3PRO (Color Display)

Reference: NU-CCANPHD-200cm

Nucular CAN wire PHD-PHD 200cm

Wire for connection to the CAN-bus of the On-board computer, uLight, BMS and other devices from Nucular. Crimped on both sides with PHD 2.0 6P connectors. Three different lengths.

Reference: NU-CENW

Nucular Encoder Wire

Nucular Replacement parts.

Reference: NU-CDCASE2

Replacement Complete Nucular Display Version 2.0 (On-Board Computer)

Nucular Replacement parts.

Reference: 50020-56C00-000

Battery Pack Discharge Cable Talaria Sting MX5

Reference: 50078-56C00-000

Regen Switch Talaria Sting MX5

Reference: 14005-54000-000

Throttle wire adaptor Sting MX3 to Green Connector (XXX-MX4-MX5)

Throttle wire adaptor allowing to use Talaria Sting MX4/MX5 and X3 (green connector) on the Talaria Sting MX3 (square connectors)

Reference: NU-CSURKIT

Nucular Phase Wire Extension

Wire extensions with bolts and nuts. For connection P24F controller to stock motor of Sur-Ron Light Bee. Also suitable as extension cords when installing the ChiBattery 72V on the Talaria XXX.

Reference: SR-EL017

Replacement Glass Fuse 5A 6mm x 30mm (Pack of 2) Talaria / Sur-Ron LB-X

Reference: NU-CBLE

Nucular Bluetooth Module

Module for configuring the controller via Android and iOS apps. It can be used instead of the On-board computer. It connects to the CAN-bus. If you order the controller and the module, a 1.2 meter long (47 inch) CAN wire (PHD-JWPF) will be included in the controller. If in addition to the module, the kit will include an On-Board computer, you need to...

Reference: NU-CDLCD

Replacement LCD-Unit For Display Nucular 1.0/2.0

Nucular Replacement parts.

Reference: NU-CTALAD

Nucular P24F Mounting Adapter for Talaria Sting MX3 / MX4 / MX5

Nucular Replacement parts.

Reference: 50170-56000-000

Tip-Over (Tilt) Sensor Talaria Sting MX3 / MX4 / MX5

Talaria OEM Replacement part.

Reference: NU-CHALLW

Nucular Hall Sensor Wire

Nucular Replacement parts.

Reference: NU-CCANPHD-40cm

Nucular CAN wire PHD-PHD 40cm

Wire for connection to the CAN-bus of the On-board computer, uLight, BMS and other devices from Nucular. Crimped on both sides with PHD 2.0 6P connectors. Three different lengths.

Reference: NU-CCCOVER

Nucular Controller Wire Cover Set (2pcs)

Plastic covers to protect wires coming in/out of the Nucular Controller. Sold as a set (upper and lower piece)

Reference: NU-CDGL2

Replacement Glass For Nucular Display Version 2.0

Nucular Replacement parts.