- -20%
![](https://ebikezilla.com/1417-large_default/fork-manitou-dorado-expert-275-talaria-sur-ron-segway-191-35787-a001-manitou.jpg)
An engineering masterpiece The Dorado is our most advanced downhill fork ever! It’s built with 7050 legs, an inverted construction, dual-chamber air springs, and TPC+ damping with independent high-and low-speed compression. Not to mention, hydraulic bottom-out and top-out features and Manitou’s patented HexLock 20mm thru-axle.
Reference: SR-W011
6061 T6 aluminum. The bolts are made of stainless steel. Function: Turn the adjusting bolt to move the axle block forward or backward to adjust the chain tension. Compared with the original one, our chain adjuster is more beautiful and convenient. Added L/R left and right marks and adjustment scale lines. The bolt and axle block can be moved at the same...
Reference: 12126-56000-000
Talaria OEM Replacement part.
Reference: 43021-56000-000
Talaria OEM Replacement part.
Reference: SR-F068
7075 T6 aluminum foot peg for high strength & durability. Surface treatment: Anodized. Extra wide platform to give you maximum traction and control. Stainless steel teeth increase the friction between feet and pedal, not easy to skid, keep your foot in place. Teeth are removable & replaceable. Several replacement teeth also included. Weight saving...
Reference: 50180-56010-000
Talaria OEM Replacement part. Attention! Only work with green connector wire. Only looking for the screws? We have them in the OEM shop ; 10429-56000-000
Reference: TL-S010
This linkage will raise the seat height by 0.8'' (20mm). Recommended for taller riders.
Reference: TL-S002
Quality suspension at an affordable price. The fork is adjusted for 170lbs but is also convenient for heavier rider. This is a very good upgrade over RST, DNM and KKE forks. Attention! Since late 2022 the fork as been improved with air valve instead of compression knob. This allow to make the fork much stiffer than the 1.0 version. Length : 27.5 Travel :...
Reference: SR-S005
Is there play in your rear suspension? Replace those loose and gritty suspension linkage bearings with a DirtyBike off road bearing kit. Kit includes six precision needle bearings and fits all Surron Light Bee and Segway X260/160.
Reference: FX-011
Featuring a hard-wearing steel construction, this mountain bike (MTB) rear shock spring offers excellent durability as you conquer every trail-riding adventure. All standard steel springs are black and are marked with their spring rate in lbs/in (in 50lb increments) and the total travel of the spring itself. Standard black springs should only be paired...
Reference: SR-S010
6061 T6 Aluminum Made. Anodized Surface. The new bearing oil seal replaces the original sealing gasket, and the integrated design is convenient for disassembly and assembly. Local thickening to maximize product strength.
Reference: FX-015
Featuring a hard-wearing steel construction, this mountain bike (MTB) rear shock spring offers excellent durability as you conquer every trail-riding adventure. All standard steel springs are black and are marked with their spring rate in lbs/in (in 50lb increments) and the total travel of the spring itself. Standard black springs should only be paired...
Reference: 141-38380-K032-D
The Dorado Comp comes stock with the Medium Coil Spring (blue). Use the tuning chart below to determine the correct spring rating for your body weight, bike, and riding style.
Reference: FX-013
Featuring a hard-wearing steel construction, this mountain bike (MTB) rear shock spring offers excellent durability as you conquer every trail-riding adventure. All standard steel springs are black and are marked with their spring rate in lbs/in (in 50lb increments) and the total travel of the spring itself. Standard black springs should only be paired...
Reference: 40480-56002-000
Lightweight Design-FASTACE is a lightweight spring damper designed and manufactured for fast downhill bikes. Its inner and outer tubes, upper and lower plates, left and right legs are made of aluminum alloy with high strength and light weight, and the interior is designed with spring and oil pressure damping. Hydraulic Damping System--The hydraulic...
Reference: MP-08-0768
The best tool on the market to remove bearing races easily
Reference: TL-S014/BL
Attention! Only suitable for DNM fork.
Reference: OSB-42FCV
Taking the mytic name of the fork that equipped the mountain bikes of Nicolas Vouilloz and Anne-Caroline Chausson during their great years in the downhill world championships, the Bos Suspension Obsys 42 FCV fork has made a very noticed arrival. Our new Obsys 42 FCV dual crown fork shows its impressive characteristics right away. It's built to win.
Reference: 40486-56002-000
Does not include set bolts. Needs to be purchased separately!