Very high lubricant power to withstand successive full speed start-ups and stops in city driving conditions. Oil film thickness remains suficient in the various driving conditions, idle, sharp accelerations, full power. Extreme-pressure and anti-wear additives to increase set lifetime operating under very high revolutions and shocks during riding. Standards: API GL-4
Reference: TL-FPSB001
For installation if you have the V2 foot peg holders: drill the third hole closest to the rear tire on both foot peg holders with a 12mm drill bit (preferred) or a 1/2" drill bit (if you don't have a 12mm drill bit).
Reference: 50180-5601B-000
Talaria OEM Replacement part. Attention! Only work with green connector wire. Only looking for the screws? We have them in the OEM shop ; 10429-56000-000
Reference: TL-FA002
Shock protector for the Talaria Sting. The sand and mud from the back wheel can damage the rear suspension over time and this is the perfect part to protect it.
Reference: SR-HA027
Everything needed to increase height by 2'' on any direct mount stem.
Reference: 353-0654
High-performance hypoid petroleum gear oil • For transmission, shaft drive and hypoid gear service • Exceeds API, GL 4 & 5 specifications • Rust and corrosion resistant 80w90 Gear Oil