**These braces will only fit, without modification, the January shipment if you purchased your Talaria from us.
For installation if you have the V1 foot peg holders: check fitment first without o-ring. If there is a gap, install one o-ring. If the gap persist, add the second o-ring.
For installation if you have the V2 foot peg holders: drill the third hole closest to the rear tire on both foot peg holders with a 12mm drill bit (preferred) or a 1/2" drill bit (if you don't have a 12mm drill bit). Then, check fitment first without o-ring. If there is a gap, install one o-ring. If the gap persist, add the second o-ring.
Reference: 250090-34
A great improvement over standard OEM-supplied offerings. Features a high-performance semi-metallic compound that blends the low-noise of a resin pad with the durability and long-life of a metallic pad. Mounted to a steel backing plate and available in pretty much every brand/model configuration going, they represent a great value-orientated all-purpose...
Reference: 252314-06
6061 Alloy. Includes 3mm, 6mm and 12mm spacer. Deep anodized treatments. Fits 1-1/8" and standard tapered steer tubes
Reference: 13213-56000-000
Talaria OEM Replacement part.
Reference: KA-005
ATTENTION!! All kits from Kaniwaba comes with a few minor visual damages that does not affect performance. They might look like used/returned products but this is the way we receive them from Kaniwaba. Carefully designed Pedal Kit for the TALARIA Sting. Left and right side brackets are made of a single piece to stand drops and tough conditions! This...
Reference: TL-FA005
Seat Riser CNC Black Talaria Sting Made from 6061 aluminum, surface is oxidized. Suitable for larger size battery upgrades.
Reference: GS-015
GritShift is tired of replacing weak floppy skid plates every other week. A change needed to incur. The fatal flaw of the Sur Ron and talaria skid plate is the lack of support, most moto-style skid plates have a support structure (Frame rail) underneath the thin lightweight metals to support and protect the skid plate from excess deformation. This is the...
Reference: 32871-56001-000
Talaria OEM Replacement part. Plastic piece only! Must re-use OEM components from the previous cover to be re-installed. (Lock, Pins, Talaria sticker not included)
Reference: 40430-56000-002
Talaria OEM Replacement part.
Reference: GS-008
Talaria Stings OEM design for the breather leaves an open hose mounted next to the rear shock. If you have ever ridden a Sur Ron or other E-moto's. This is the least ideal place for an open line. Mud, dirt, and water spray, from your tire, will likely be able to enter your, gear case and compromise longevity. The GritShift R&D team has designed a...
Reference: TL-FA002
Shock protector for the Talaria Sting. The sand and mud from the back wheel can damage the rear suspension over time and this is the perfect part to protect it.
Reference: SR-F074
6061 T6 Aluminum anodized adjustable kickstand than can be adjusted up and down 1.2'' (30mm). Designed to match different wheels and suspension size. The side support base is enlarged to increase the contact area with the ground. The bike can site on it more stable. CNC machined parts are lighter than the original bike. Must re-use OEM springs, kickstand...
Reference: TL-FA006
high quality seat made of leather. the perfect addition to make your Talaria Sting MX3 and MX4 more comfortable. Works directly without modifications.
Reference: 12122-56000-000
Talaria OEM Replacement part.
Reference: 13051-56000-000
Talaria OEM Replacement part.
Reference: 13191-56000-000
Talaria OEM Replacement part.
Reference: 40642-56000-000
Talaria OEM Replacement part.
Reference: TL-FA003
CNC aluminium foot pegs mounts, Will not bend like the original ones, however, using a V1 peg brace is still recommended. ATTENTION! The kick stand from a Sting R MX4 will need to be modified (filed down 1mm) so it can be used
Reference: 13554-56000-000
Talaria OEM Replacement part.
**These braces will only fit, without modification, the January shipment if you purchased your Talaria from us.
For installation if you have the V1 foot peg holders: check fitment first without o-ring. If there is a gap, install one o-ring. If the gap persist, add the second o-ring.
For installation if you have the V2 foot peg holders: drill the third hole closest to the rear tire on both foot peg holders with a 12mm drill bit (preferred) or a 1/2" drill bit (if you don't have a 12mm drill bit). Then, check fitment first without o-ring. If there is a gap, install one o-ring. If the gap persist, add the second o-ring.
