ATTENTION!! All kits from Kaniwaba comes with a few minor visual damages that does not affect performance. They might look like used/returned products but this is the way we receive them from Kaniwaba.
Carefully designed Pedal Kit for the TALARIA Sting. Left and right side brackets are made of a single piece to stand drops and tough conditions! This pedal kit will NOT PROPEL your ebike. A pedal kit that lets your rear suspension WORK. The original pedal kit is located directly on the rear swingarm, therefore it does not spring your weight... you will feel the difference immediately going over obstacles, plus the turning is greatly improved! Plug and Play pedal kit fixed to the frame! You just disassemble the existing side brackets and install the pedal kit. Easy setup. Adjust the kit to your bike using the stainless steel collars. You may easily change between pedals or footpegs. Just install the footpegs or the cranks without removing the pedal kit, you can also remove the spindle. You choose! Maintenance free. New design is maintenance free since it has sealed cartridge bearings. Also works as a brace bar. Reduced wobble. No wobble, a common problem with the OEM kit. Cranksets compatible. This kit is compatible with JIS square tapered cranksets, no major crank offset is required. Aluminium made in order to reduce weight. With a weight of around 3 Lb (1.5 kg) it is lighter than the OEM kit. The spindle is made of stainless steel. Durable Materials. Parts made of aluminum and stainless steel. It will last a long time. Cranks & Pedals included !
Reference: 73-3603L
In motion air is forced through multiple air intake vents, then passed through aligned vent channels in the EPS and exits out multiple rear exhaust vents, keeping you cool and comfortable
Reference: SR-F068
7075 T6 aluminum foot peg for high strength & durability. Surface treatment: Anodized. Extra wide platform to give you maximum traction and control. Stainless steel teeth increase the friction between feet and pedal, not easy to skid, keep your foot in place. Teeth are removable & replaceable. Several replacement teeth also included. Weight saving...
Reference: GS-009
Sur Ron to Talaria wheel conversion coming up! We know the Talaria wheels will be some time away from anyone getting 18/21, 16/19, and 17/17 setups to market so we built an adapter kit to move any Sur Ron aftermarket wheel over to Talaria! This will allow you to run stronger and wider aftermarket wheels with a complete plug-and-play install! Made from...
Reference: 250090-34
A great improvement over standard OEM-supplied offerings. Features a high-performance semi-metallic compound that blends the low-noise of a resin pad with the durability and long-life of a metallic pad. Mounted to a steel backing plate and available in pretty much every brand/model configuration going, they represent a great value-orientated all-purpose...
Reference: SR-W011
6061 T6 aluminum. The bolts are made of stainless steel. Function: Turn the adjusting bolt to move the axle block forward or backward to adjust the chain tension. Compared with the original one, our chain adjuster is more beautiful and convenient. Added L/R left and right marks and adjustment scale lines. The bolt and axle block can be moved at the same...
Reference: TL-FA005
Seat Riser CNC Black Talaria Sting Made from 6061 aluminum, surface is oxidized. Suitable for larger size battery upgrades.
Reference: TL-FA007
This can prevent the frame neck from getting loose (Egg shaped) due to an improper headset tension.
Reference: KA-006
ATTENTION!! All kits from Kaniwaba comes with a few minor visual damages that does not affect performance. They might look like used/returned products but this is the way we receive them from Kaniwaba. Carefully designed Pedal Kit for the TALARIA Sting. Left and right side brackets are made of a single piece to stand drops and tough conditions! This pedal...
Reference: 50400-56000-000
Talaria OEM Replacement part.
Reference: SR-F068
7075 T6 aluminum foot peg for high strength & durability. Surface treatment: Anodized. Extra wide platform to give you maximum traction and control. Stainless steel teeth increase the friction between feet and pedal, not easy to skid, keep your foot in place. Teeth are removable & replaceable. Several replacement teeth also included. Weight saving...
Reference: 12672-56000-000
Talaria OEM Replacement part.
Reference: KA-007
Replacement chain for the Kaniwaba Talaria Sting pedal system.
Reference: SR-F074
6061 T6 Aluminum anodized adjustable kickstand than can be adjusted up and down 1.2'' (30mm). Designed to match different wheels and suspension size. The side support base is enlarged to increase the contact area with the ground. The bike can site on it more stable. CNC machined parts are lighter than the original bike. Must re-use OEM springs, kickstand...
Reference: TL-FA006
high quality seat made of leather. the perfect addition to make your Talaria Sting MX3 and MX4 more comfortable. Works directly without modifications.
Reference: 12121-56000-000
Talaria OEM Replacement part.
Reference: GUT-002/BK
Guts Racing quality seat for Talaria Sting electric dirt bike.
Reference: 40642-56000-000
Talaria OEM Replacement part.
Reference: 42052-56000-000
Talaria OEM Replacement part.
Reference: 12126-56000-000
Talaria OEM Replacement part.
ATTENTION!! All kits from Kaniwaba comes with a few minor visual damages that does not affect performance. They might look like used/returned products but this is the way we receive them from Kaniwaba.
Carefully designed Pedal Kit for the TALARIA Sting. Left and right side brackets are made of a single piece to stand drops and tough conditions! This pedal kit will NOT PROPEL your ebike. A pedal kit that lets your rear suspension WORK. The original pedal kit is located directly on the rear swingarm, therefore it does not spring your weight... you will feel the difference immediately going over obstacles, plus the turning is greatly improved! Plug and Play pedal kit fixed to the frame! You just disassemble the existing side brackets and install the pedal kit. Easy setup. Adjust the kit to your bike using the stainless steel collars. You may easily change between pedals or footpegs. Just install the footpegs or the cranks without removing the pedal kit, you can also remove the spindle. You choose! Maintenance free. New design is maintenance free since it has sealed cartridge bearings. Also works as a brace bar. Reduced wobble. No wobble, a common problem with the OEM kit. Cranksets compatible. This kit is compatible with JIS square tapered cranksets, no major crank offset is required. Aluminium made in order to reduce weight. With a weight of around 3 Lb (1.5 kg) it is lighter than the OEM kit. The spindle is made of stainless steel. Durable Materials. Parts made of aluminum and stainless steel. It will last a long time. Cranks & Pedals included !
