ATTENTION!! All kits from Kaniwaba comes with a few minor visual damages that does not affect performance. They might look like used/returned products but this is the way we receive them from Kaniwaba.
Carefully designed Pedal Kit for the TALARIA Sting. Left and right side brackets are made of a single piece to stand drops and tough conditions! This pedal kit will NOT PROPEL your ebike. A pedal kit that lets your rear suspension WORK. The original pedal kit is located directly on the rear swingarm, therefore it does not spring your weight... you will feel the difference immediately going over obstacles, plus the turning is greatly improved! Plug and Play pedal kit fixed to the frame! You just disassemble the existing side brackets and install the pedal kit. Easy setup. Adjust the kit to your bike using the stainless steel collars. You may easily change between pedals or footpegs. Just install the footpegs or the cranks without removing the pedal kit, you can also remove the spindle. You choose! Maintenance free. New design is maintenance free since it has sealed cartridge bearings. Also works as a brace bar. Reduced wobble. No wobble, a common problem with the OEM kit. Cranksets compatible. This kit is compatible with JIS square tapered cranksets, no major crank offset is required. Aluminium made in order to reduce weight. With a weight of around 3 Lb (1.5 kg) it is lighter than the OEM kit. The spindle is made of stainless steel. Durable Materials. Parts made of aluminum and stainless steel. It will last a long time. Cranks & Pedals included !
Référence: SR-T011
420 Sprocket for Talaria, Sur-ron, E-rides and Segway bikes. Made from AL7075, Available in 40T, 44T, 48T, 52T, 54T, 56T, 58T, 60T and 62T.
Référence: 27-L033
Pouvoir lubrifiant très élevé pour résister aux démarrages et arrêts successifs à pleine vitesse en conditions de conduite urbaine. L'épaisseur du film d'huile reste suffisante dans les différentes conditions de conduite, ralenti, accélérations brusques, pleine puissance. Additifs extrême-pression et anti-usure pour augmenter la durée de vie des ensembles...
Référence: 3517-0443
Dimensions: 19”L x 11”W x 7”D. 1200D Ballistic polyester/600D with PU coating throughout. THOR reflective logo. Reverse face YKK® water-resistant zip on front. Internal mesh pocket. Mint green zipper pulls. Micro fleece lined glasses/media pocket. Large main compartment with padded laptop sleeve
Référence: SR-TC134
Chaîne de qualité supérieure conçue pour les vélos électriques Talaria, Sur-Ron et Segway avec pignon 60T +. Attention, il s'agit d'une chaîne plus longue faite pour les pignons 60,62 et 64T. Vous devrez supprimer certains liens.
Référence: 317-6232
Le Grip S II est une poignée à double densité avec un motif en diamant à densité douce entourant un noyau et un embout de densité rm. La texture en diamant surélevé offre une adhérence incroyable tandis que le composé souple aide à réduire la fatigue des bras et des mains. Les beignets de préhension inclus aident à réduire l'abrasion et les cloques. Cette...
Référence: 41010-56002-000
Talaria OEM Replacement part.
Référence: TL-FA002
Shock protector for the Talaria Sting. The sand and mud from the back wheel can damage the rear suspension over time and this is the perfect part to protect it.
Référence: 42052-56000-000
Talaria OEM Replacement part.
Référence: 13191-56000-000
Talaria OEM Replacement part.
Référence: TL-FA007
This can prevent the frame neck from getting loose (Egg shaped) due to an improper headset tension.
Référence: 40621-56000-000
Talaria OEM Replacement part.
Référence: 12125-56000-000
Talaria OEM Replacement part.
Référence: 32871-56001-000
Talaria OEM Replacement part. Plastic piece only! Must re-use OEM components from the previous cover to be re-installed. (Lock, Pins, Talaria sticker not included)
Référence: GUT-002/PU
Guts Racing quality seat for Talaria Sting electric dirt bike.
Référence: MP-33-1801
Will help eliminate suspension rattle, precision machined for a perfect fit on the Talaria Sting Linkage.
Référence: SR-F071
Repose-pieds en aluminium 7075 T6 pour une résistance et une durabilité élevées. Traitement de surface : Anodisé. Plate-forme extra large pour vous offrir un maximum de traction et de contrôle. Les dents en acier inoxydable augmentent la friction entre les pieds et la pédale, ne glissent pas facilement, maintiennent votre pied en place. Les dents sont...
Référence: SR-F094
Looks much better than stock key. No need to cut plastic off, this has been machined so the complete key fits in there. We suggest to add a tiny drop of glue if you feel the key rattling inside. Decorative item.
Référence: SR-F074
Béquille réglable en aluminium anodisé 6061 T6 pouvant être ajustée de haut en bas de 1,2 '' (30 mm). Conçu pour s'adapter à différentes roues et tailles de suspension. La base d'appui latérale est agrandie pour augmenter la surface de contact avec le sol. Le vélo peut être plus stable. Les pièces usinées CNC sont plus légères que le vélo d'origine....
Référence: 40622-56000-000
Talaria OEM Replacement part.
Référence: 13051-56000-000
Talaria OEM Replacement part.
ATTENTION!! All kits from Kaniwaba comes with a few minor visual damages that does not affect performance. They might look like used/returned products but this is the way we receive them from Kaniwaba.
Carefully designed Pedal Kit for the TALARIA Sting. Left and right side brackets are made of a single piece to stand drops and tough conditions! This pedal kit will NOT PROPEL your ebike. A pedal kit that lets your rear suspension WORK. The original pedal kit is located directly on the rear swingarm, therefore it does not spring your weight... you will feel the difference immediately going over obstacles, plus the turning is greatly improved! Plug and Play pedal kit fixed to the frame! You just disassemble the existing side brackets and install the pedal kit. Easy setup. Adjust the kit to your bike using the stainless steel collars. You may easily change between pedals or footpegs. Just install the footpegs or the cranks without removing the pedal kit, you can also remove the spindle. You choose! Maintenance free. New design is maintenance free since it has sealed cartridge bearings. Also works as a brace bar. Reduced wobble. No wobble, a common problem with the OEM kit. Cranksets compatible. This kit is compatible with JIS square tapered cranksets, no major crank offset is required. Aluminium made in order to reduce weight. With a weight of around 3 Lb (1.5 kg) it is lighter than the OEM kit. The spindle is made of stainless steel. Durable Materials. Parts made of aluminum and stainless steel. It will last a long time. Cranks & Pedals included !
