- New
![](https://ebikezilla.com/4392-large_default/rear-disc-guard-cnc-dual-caliper-bracket-sur-ron-lb-x-segway-x260-sh-b031-ebikezilla.jpg)
Material: 6061 T6 Aluminum. Surface: Anodized. Prevent brake disc collision. Protect your rear rotor from rocks and stumps. The all CNC billet aluminum design replaces the original cast aluminum caliper mount for more strength and longevity. Rear spacer catch is slot cut to allow for easier rear wheel removal. Made to fit a 203mm disc, it does not protect the new MX4 220mm disc. Now available in a dual caliper design, allows you to run a foot brake setup, while keeping the OEM brake on the handlebar.
Reference: 01-04190
A versatile performer with a tough nylon carcass and raised dimpled knobs that work well in a variety of terrain. Narrow knobby configuration means less of an environmental foot print on the trail. 4 ply rated. DOT approved. Not intended for extended highway use. All sizes will work for front or rear fitment. 2.85kg / 6.28 lbs
Reference: 341426-14
For use in mineral-based brake and hydraulic systems specifying mineral oils. Developed in collaboration with a premium OEM component manufacturer. Mineral based formula does not damage painted surfaces or carbon fiber. Low maintenance formula does not absorb moisture like DOT fluids. High boil point and minimal frequency of system bleeds. Zero-fade...
Reference: SH-B014
Hydrolic Rear Foot Brake CNC Black for Sur-Ron LB-X and Segway X260 Made of 6061 T6 aluminum and CNC machined. Surface Treatment: Anodized. Hydraulic master cylinder activates rear brake (replacing hand operated master cylinder). Change the brake to the foot and keep the hand brake. Cater to some motorcyclists who are used to operating. Stronger and...
Reference: SH-B032
Material: 6061 T6 Aluminum. Surface: Anodized. Prevent brake disc collision. Protect your rear rotor from rocks and stumps. The all CNC billet aluminum design replaces the original cast aluminum caliper mount for more strength and longevity. Rear spacer catch is slot cut to allow for easier rear wheel removal. Made to fit a 203mm disc, it does not...
Reference: SH-B029
Fits OEM seal (not included). Made for Sur-Ron Light Bee OEM master cylinders only.
Reference: 95-36115-K002-D
Dominion's master cylinder is factory tuned for the shortest dead stroke possible and a crisp bite point. The Dominion A4 caliper utilizes four pistons in the most structurally rigid design possible. It features a cold-forged caliper and KingPin structural pad retention bolt that increases stiffness. With a motorsports-inspired Two-Stroke dual port bleed...
Reference: BFD426G1554
Suitable for extreme terrain, varying weather conditions, or competition use. Perfect for downhill biking or lengthy periods of steady braking. Maximum stopping power in the dirt. High temperature and fade resistance. Great for wet weather and mud performance.
Reference: 98-36141-K001-D
The good friction. Speed and confidence come with better braking. Refresh or update the best brakes in the world with some new pads! Sintered metallic friction material provides maximum stopping power in wet and dry conditions.
Reference: SH-B025
Required to run oversized 250mm brake disc.
Reference: SH-B012/AL
Folding CNC Brake lever made of 6061 T6 aluminum. Stronger and lightweight. Attention! Talaria Sting MX4 - Only compatible with LBN Brake system similar to the Sting MX3 (Red Caps on the caliper)
Reference: 250090-34
A great improvement over standard OEM-supplied offerings. Features a high-performance semi-metallic compound that blends the low-noise of a resin pad with the durability and long-life of a metallic pad. Mounted to a steel backing plate and available in pretty much every brand/model configuration going, they represent a great value-orientated all-purpose...
Reference: SH-B018
Oversized upgrade floating disc for Sur-Ron Light bee / Segway X260, will require the proper caliper spacers separately. Significant Brake upgrade over stock rotors.
Reference: SB002
This adapter will allow you to run a bicycle rotor up to 20mm larger than standard size. This is typically used to run the 203 / 223mm Galfer USA oversize brake rotor.
Reference: DB007W
223mm fixed-mount Galfer rotor for mountain biking. Every high-quality, Galfer-patented Wave rotor is made from a proprietary mix of virgin high carbon 420 stainless steel, laser cut (never stamped), double disc-parallel ground to assure perfect parallel flatness and heat treated to each specific application. Seamlessly replaces stock rotor. Full...
Reference: SH-B023
Thicker 203mm brake disc - No spacers required!
@CUSTOMER_NAME@
@AUTHOR_PROFILE@ @COMMENT_ISO_COUNTRY@@COMMENT_TITLE@
@COMMENT_COMMENT@