Oversized upgrade floating disc for any bike, will require the proper caliper spacers separately. Significant Brake upgrade over stock rotors.
250mm caliper adapters required! Sold separately. Make sure you pick the right model for your fork. Please contact us if you are unsure which model you need.
Can be installed on any bike model, as long as a 250mm caliper spacer is used.
It will require bleeding the calipers on bikes running 2.0mm original discs (Sur-ron Light bee, Talaria MX3). Not required on the Talaria xXx / MX4 as they are 2.3mm from factory.
Reference: SR-HA025
Everything needed to increase height by 1'' on any direct mount stem.
Reference: 252334-33
CNC bending and extreme gradual taper (XGT) technology result in lighter, thinner wall. Increased strength and stiffness compared to conventional alloy bars. Shot-peening and anodizing enhances fatigue life even further. Dial your fit - adjustable to 740mm.
Reference: 43751-56A00-000
Talaria OEM Replacement part.
Reference: NU-CTHR
Nucular Replacement parts. Wired for a Nucular screen, will require to be re-wired for any other controller brand.
Reference: 310419-01
Replacement set of disc brake pads for Sram G2 Ultimate Caliper (Doesn't fit OEM caliper). Sintered pad with steel back plate. Heavy Duty / Powerful Compound.
Reference: 35470-56000-000
Talaria OEM Replacement part.
Reference: DB007W
223mm fixed-mount Galfer rotor for mountain biking. Every high-quality, Galfer-patented Wave rotor is made from a proprietary mix of virgin high carbon 420 stainless steel, laser cut (never stamped), double disc-parallel ground to assure perfect parallel flatness and heat treated to each specific application. Seamlessly replaces stock rotor. Full...
Reference: SH-B022
Thicker discs than original - Bleeding required!
Reference: 341426-14
For use in mineral-based brake and hydraulic systems specifying mineral oils. Developed in collaboration with a premium OEM component manufacturer. Mineral based formula does not damage painted surfaces or carbon fiber. Low maintenance formula does not absorb moisture like DOT fluids. High boil point and minimal frequency of system bleeds. Zero-fade...
Reference: SH-B012/RE
Folding CNC Brake lever made of 6061 T6 aluminum with anodized black surface. Stronger and lightweight. Attention! Talaria Sting MX4 - Only compatible with LBN Brake system similar to the Sting MX3 (Red Caps on the caliper)
Reference: SB003
This adapter will allow you to run a bicycle rotor up to 63mm larger than standard size. This is typically used to run the 223mm Galfer USA oversize brake rotor.
Reference: 250090-34
A great improvement over standard OEM-supplied offerings. Features a high-performance semi-metallic compound that blends the low-noise of a resin pad with the durability and long-life of a metallic pad. Mounted to a steel backing plate and available in pretty much every brand/model configuration going, they represent a great value-orientated all-purpose...
Reference: 95-36115-K004-D
Introducing the all-new, Stealth Dominion, our award-winning Hayes Dominion A4 brakes are back – adding even more ways for you to stop! Dominion's master cylinder is factory tuned for the shortest dead stroke possible and a crisp bite point. The Dominion A4 caliper utilizes four pistons in the most structurally rigid design possible. It features a...
Reference: LW-LP37
Lewis LP series brake pads offers a stronger braking performance in low-speed conditions, Commonly known as user friendly brake pads that are multipurpose. Good in wet and/or dry conditions.
Reference: DB004W2
203mm fixed-mount Galfer rotor for mountain biking. Every high-quality, Galfer-patented Wave rotor is made from a proprietary mix of virgin high carbon 420 stainless steel, laser cut (never stamped), double disc-parallel ground to assure perfect parallel flatness and heat treated to each specific application. Seamlessly replaces stock rotor. Full...
Reference: SH-B012/AL
Folding CNC Brake lever made of 6061 T6 aluminum. Stronger and lightweight. Attention! Talaria Sting MX4 - Only compatible with LBN Brake system similar to the Sting MX3 (Red Caps on the caliper)
Reference: SH-B013/BK
Front Disc Guard made of 6061 T6 aluminum and 304 stainless steel screws for Talaria / Sur-Ron / Segway electric dirt bike.
Reference: BFD426G1554
Suitable for extreme terrain, varying weather conditions, or competition use. Perfect for downhill biking or lengthy periods of steady braking. Maximum stopping power in the dirt. High temperature and fade resistance. Great for wet weather and mud performance.
Reference: 95-36115-K002-D
Dominion's master cylinder is factory tuned for the shortest dead stroke possible and a crisp bite point. The Dominion A4 caliper utilizes four pistons in the most structurally rigid design possible. It features a cold-forged caliper and KingPin structural pad retention bolt that increases stiffness. With a motorsports-inspired Two-Stroke dual port bleed...
Oversized upgrade floating disc for any bike, will require the proper caliper spacers separately. Significant Brake upgrade over stock rotors.
