Module for configuring the controller via Android and iOS apps. It can be used instead of the On-board computer. It connects to the CAN-bus. If you order the controller and the module, a 1.2 meter long (47 inch) CAN wire (PHD-JWPF) will be included in the controller. If in addition to the module, the kit will include an On-Board computer, you need to order an additional CAN wire (PHD-PHD) from the “Accessories” section.
Reference: NU-TAL001/BK
Plug & Ride Kit for Talaria Sting MX3 and MX4. Up to 30% more power оn standard 60V battery and up to 300% on 72V battery.
Reference: 12291-56000-000
Talaria OEM Replacement part.
Reference: GS-031
Riding at night just got a whole lot easier and safer. This time you’re going to see that pothole before it wrecks your tire. Score one for you! The GritShift Blinder LED Light Bar Headlight not only increases nighttime visibility, but it also makes your bike look like it belongs to a pro – because it does. Despite its slim design, this LED Light Bar is a...
Reference: NU-CDCASE2
Nucular Replacement parts.
Reference: 50030-54001-000
Talaria OEM Replacement part.
Reference: NU-CSURKIT
Wire extensions with bolts and nuts. For connection P24F controller to stock motor of Sur-Ron Light Bee. Also suitable as extension cords when installing the ChiBattery 72V on the Talaria XXX.
Reference: NU-CDCASE2
Nucular Replacement parts.
Reference: NU-CCANPHD-40cm
Wire for connection to the CAN-bus of the On-board computer, uLight, BMS and other devices from Nucular. Crimped on both sides with PHD 2.0 6P connectors. Three different lengths.
Reference: 14005-54000-000
Throttle wire adaptor allowing to use Talaria Sting MX4/MX5 and X3 (green connector) on the Talaria Sting MX3 (square connectors)
Reference: 50300-56C00-000
This display will ONLY fit the MX5 / TL5500 or XXXPRO / TL2500PRO bikes. Please do not order for any other models as it will not work.
Reference: NU-CTALAD
Nucular Replacement parts.
Reference: NU-CCCOVER
Plastic covers to protect wires coming in/out of the Nucular Controller. Sold as a set (upper and lower piece)
Reference: NU-CCANPHD-120cm
Wire for connection to the CAN-bus of the On-board computer, uLight, BMS and other devices from Nucular. Crimped on both sides with PHD 2.0 6P connectors. Three different lengths.
Module for configuring the controller via Android and iOS apps. It can be used instead of the On-board computer. It connects to the CAN-bus. If you order the controller and the module, a 1.2 meter long (47 inch) CAN wire (PHD-JWPF) will be included in the controller. If in addition to the module, the kit will include an On-Board computer, you need to order an additional CAN wire (PHD-PHD) from the “Accessories” section.
