Talaria OEM Replacement part.
Reference: 353-0654
High-performance hypoid petroleum gear oil • For transmission, shaft drive and hypoid gear service • Exceeds API, GL 4 & 5 specifications • Rust and corrosion resistant 80w90 Gear Oil
Reference: 150001
Our n8tive tool for minimalists. A super lightweight that goes unnoticed with you until on-trail emergency. 8 applications wrapped up in 70 grams only, ultra flat and made from best tool steel quality currently available. So, when the chips are down, don’t manage with other! Dimensions: 70mm x 32mm x 12mm (L x W x H), folded. Weight: 70g. Hex keys 2, 2.5,...
Reference: GS-024
Battery conservation and stealth are two very important needs of Sur-Ron, Segway X160/X260, and Talaria riders, but factory headlights are not conducive to fulfilling those needs. With the Sleeper Switch by GritShift now you can have both. This custom-made plug-and-play kill switch is designed to conserve the battery on your SurRon, Segway, or Talaria by...
Reference: 40486-56005-000
Does not include set bolt. Need to be purchased separately!
Reference: NU-CSURKIT
Wire extensions with bolts and nuts. For connection P24F controller to stock motor of Sur-Ron Light Bee. Also suitable as extension cords when installing the ChiBattery 72V on the Talaria XXX.
Reference: 50030-54001-000
Talaria OEM Replacement part.
Reference: NU-CTHR
Nucular Replacement parts. Wired for a Nucular screen, will require to be re-wired for any other controller brand.
Reference: NU-CTALAD
Nucular Replacement parts.
Reference: NU-CCANPHD-40cm
Wire for connection to the CAN-bus of the On-board computer, uLight, BMS and other devices from Nucular. Crimped on both sides with PHD 2.0 6P connectors. Three different lengths.
Reference: NU-CBLE
Module for configuring the controller via Android and iOS apps. It can be used instead of the On-board computer. It connects to the CAN-bus. If you order the controller and the module, a 1.2 meter long (47 inch) CAN wire (PHD-JWPF) will be included in the controller. If in addition to the module, the kit will include an On-Board computer, you need to...
Reference: NU-TALCDKIT-TAL
Fork stem mount kit, with Gopro style extension for Talaria bikes
Reference: NU-CCANPHD-200cm
Wire for connection to the CAN-bus of the On-board computer, uLight, BMS and other devices from Nucular. Crimped on both sides with PHD 2.0 6P connectors. Three different lengths.
Reference: 14005-54000-000
Throttle wire adaptor allowing to use Talaria Sting MX4/MX5 and X3 (green connector) on the Talaria Sting MX3 (square connectors)
Talaria OEM Replacement part.
