Reference: 14005-54000-000
Throttle wire adaptor Sting MX3 to Green Connector (XXX-MX4-MX5)
Throttle wire adaptor allowing to use Talaria Sting MX4/MX5 and X3 (green connector) on the Talaria Sting MX3 (square connectors)
Talaria OEM Replacement part. Attention! Only work with green connector wire. Only looking for the screws? We have them in the OEM shop ; 10429-56000-000
Reference: 14005-54000-000
Throttle wire adaptor allowing to use Talaria Sting MX4/MX5 and X3 (green connector) on the Talaria Sting MX3 (square connectors)
Reference: 43532-56000-000
Talaria OEM Replacement part.
Reference: 35533-56A00-000
Talaria OEM Replacement part.
Reference: 32431-56A00-000
Talaria Sting MX4 OEM replacement rear fender. Good upgrade for Talaria Sting MX3 supplied with a smaller one.
Reference: 40328-56000-000
Talaria OEM Replacement part.
Reference: 50190-56001-000
Talaria OEM Replacement part.
Reference: NU-CTHR
Nucular Replacement parts. Wired for a Nucular screen, will require to be re-wired for any other controller brand.
Reference: NU-CCCOVER
Plastic covers to protect wires coming in/out of the Nucular Controller. Sold as a set (upper and lower piece)
Reference: 50180-5600B-000
Talaria OEM Replacement part. Only looking for the screws? We have them in the OEM shop ; 10429-56000-000
Reference: TA-E001
Plug and play turn signal kit with everything needed for install. Front turn signals double as bright Running Lights. License plate light: Rear turn Signal Light included. Headlight switch included, when headlight is on off position, brake light, and signals are still functional, although running lights will be turned off. Turn Signal light switch...
Reference: NU-CCANPHD-40cm
Wire for connection to the CAN-bus of the On-board computer, uLight, BMS and other devices from Nucular. Crimped on both sides with PHD 2.0 6P connectors. Three different lengths.
Reference: NU-CCANPHD-120cm
Wire for connection to the CAN-bus of the On-board computer, uLight, BMS and other devices from Nucular. Crimped on both sides with PHD 2.0 6P connectors. Three different lengths.
Reference: NU-TALCDKIT-TAL
Fork stem mount kit, with Gopro style extension for Talaria bikes
Reference: 50400-56000-000
Talaria OEM Replacement part.
Reference: NU-CBLE
Module for configuring the controller via Android and iOS apps. It can be used instead of the On-board computer. It connects to the CAN-bus. If you order the controller and the module, a 1.2 meter long (47 inch) CAN wire (PHD-JWPF) will be included in the controller. If in addition to the module, the kit will include an On-Board computer, you need to...
Reference: NU-CTALAD
Nucular Replacement parts.