- -10%
Talaria OEM Replacement part. Attention! Only work with green connector wire. Only looking for the screws? We have them in the OEM shop ; 10429-56000-000
Référence: 14005-54000-000
Throttle wire adaptor allowing to use Talaria Sting MX4/MX5 and X3 (green connector) on the Talaria Sting MX3 (square connectors)
Référence: BFD426G1554
Convient aux terrains extrêmes, aux conditions météorologiques variables ou à une utilisation en compétition. Parfait pour le vélo de descente ou de longues périodes de freinage régulier. Puissance d'arrêt maximale dans la saleté. Haute température et résistance à la décoloration. Idéal pour les performances par temps humide et dans la boue.
Référence: 40499-56C02-000
Attention - Screws sold separately!
Référence: 31304-5600Z-002
Talaria OEM Replacement part.
Référence: MOT105859
Pouvoir lubrifiant très élevé pour résister aux démarrages et arrêts successifs à pleine vitesse en conditions de conduite urbaine. L'épaisseur du film d'huile reste suffisante dans les différentes conditions de conduite, ralenti, accélérations brusques, pleine puissance. Additifs extrême-pression et anti-usure pour augmenter la durée de vie des ensembles...
Référence: 50300-56000-000
This display will ONLY fit the MX3 / TL3000 bikes. Please do not order for any other models as it will not work.
Référence: TA-E001
Plug and play turn signal kit with everything needed for install. Front turn signals double as bright Running Lights. License plate light: Rear turn Signal Light included. Headlight switch included, when headlight is on off position, brake light, and signals are still functional, although running lights will be turned off. Turn Signal light switch...
Référence: NU-CBLE
Module for configuring the controller via Android and iOS apps. It can be used instead of the On-board computer. It connects to the CAN-bus. If you order the controller and the module, a 1.2 meter long (47 inch) CAN wire (PHD-JWPF) will be included in the controller. If in addition to the module, the kit will include an On-Board computer, you need to...
Référence: NU-CCANPHD-120cm
Wire for connection to the CAN-bus of the On-board computer, uLight, BMS and other devices from Nucular. Crimped on both sides with PHD 2.0 6P connectors. Three different lengths.
Référence: 50030-54001-000
Talaria OEM Replacement part.
Référence: NU-CCCOVER
Plastic covers to protect wires coming in/out of the Nucular Controller. Sold as a set (upper and lower piece)
Référence: NU-CCANPHD-200cm
Wire for connection to the CAN-bus of the On-board computer, uLight, BMS and other devices from Nucular. Crimped on both sides with PHD 2.0 6P connectors. Three different lengths.
Référence: NU-CTALAD
Nucular Replacement parts.
Référence: NU-TALCDKIT-TAL
Fork stem mount kit, with Gopro style extension for Talaria bikes
Référence: NU-CSURKIT
Wire extensions with bolts and nuts. For connection P24F controller to stock motor of Sur-Ron Light Bee. Also suitable as extension cords when installing the ChiBattery 72V on the Talaria XXX.
Référence: 50400-56000-000
Talaria OEM Replacement part.