- -10%
Replacement Swing Arm Bearing (set of 4) for Sur-Ron LB-X and Segway X260.
Reference: 0312-0234
Kenda Performance Off-Road Tire for Talaria Sting, Sur-Ron LB-X and Segway X260. 90/100-16 is for 16'' Aftermarket Rim and weighs 3.55kg / 7.83lbs 70/100-17 is for 17" Original Rim Sur Ron S and weighs 2.20 kg / 4.85 lbs 100/100-18 is for 18'' Aftermarket Rim 70/100-19 is for 19'' Original Rim (OEM) and weighs 2.50 kg / 5.51 lbs 100/90-19 is for...
Reference: SH-B007
Custom rear hydraulic brake pedal for Sur Ron. Hydraulic master cylinder activates rear brake (replacing hand operated master cylinder) . Due to clearance issues, front most peg position is not available. Bike Requirements : Master cylinder uses only dot4/dot5.1 brake fluid and is incompatible with brakes that use mineral oil such as stock brakes. We...
Reference: 209-9009
STI Motorcycle Tubes are strong, stronger, strongest. At 2mm thick, the “Heavy Duty” model is 50 percent thicker than most standard tubes on the market today.
Reference: 25100-YQ2A-0100
Replacement Speedometer for Sur-Ron LB-X and Segway X260.
Reference: SR-F070
7075 T6 aluminum foot peg for high strength & durability. Surface treatment: Anodized. Extra wide platform to give you maximum traction and control. Stainless steel teeth increase the friction between feet and pedal, not easy to skid, keep your foot in place. Teeth are removable & replaceable. Several replacement teeth also included. Weight saving...
Reference: BTRS-001/BR
The IZI Brothers Swingarm Kit is the complete rear-end upgrade for Sur-Ron Light Bee. A heat-treated 6061 T6 monoblock swingarm engineered for 3.5x stiffness with minimal weight gain, plus the critical parts around it: chain guide, Grade 5 titanium axles, disc guard, mud guard, and axle blocks. Built for cleaner handling, more stability, and long-term...
Reference: BTRS-002/GY
Upgrade your Sur-Ron Light Bee X and Light Bee L1E with the IZI Brothers 6061-T6 monoblock swingarm - forged side arms, CNC finished, heat treated, and built for riders who push hard. Expect major stiffness gains, cleaner rear-end tracking, and a +10 mm ride height while keeping OEM geometry lines.
Reference: BTRS-001/BK
The IZI Brothers Swingarm Kit is the complete rear-end upgrade for Sur-Ron Light Bee. A heat-treated 6061 T6 monoblock swingarm engineered for 3.5x stiffness with minimal weight gain, plus the critical parts around it: chain guide, Grade 5 titanium axles, disc guard, mud guard, and axle blocks. Built for cleaner handling, more stability, and long-term...
Reference: BTRS-017
IZI Brothers Swingarm Bearing Kit replaces the entire pivot assembly of the IZI Brothers monoblock swingarm for Sur-Ron Light Bee. Needle roller bearings and controlled shimming remove lateral play, reduce friction, and keep the rear suspension smooth and consistent ride after ride.
Reference: BTRS-002/BK
Upgrade your Sur-Ron Light Bee X and Light Bee L1E with the IZI Brothers 6061-T6 monoblock swingarm - forged side arms, CNC finished, heat treated, and built for riders who push hard. Expect major stiffness gains, cleaner rear-end tracking, and a +10 mm ride height while keeping OEM geometry lines.
Reference: BTRS-002/BR
Upgrade your Sur-Ron Light Bee X and Light Bee L1E with the IZI Brothers 6061-T6 monoblock swingarm - forged side arms, CNC finished, heat treated, and built for riders who push hard. Expect major stiffness gains, cleaner rear-end tracking, and a +10 mm ride height while keeping OEM geometry lines.
Reference: BTRS-014/BK
IZI Brothers Titanium Swingarm Axle upgrades the Sur-Ron Light Bee pivot with higher stiffness and lower weight. CNC machined from Grade 5 titanium Ti-6Al-4V for strength, corrosion resistance and precise alignment of frame, swingarm and bearings. Direct plug-and-play fit for IZI Brothers swingarm and OEM Sur-Ron Light Bee X and Light Bee L1E swingarms,...
Reference: BTRS-002/CP
Upgrade your Sur-Ron Light Bee X and Light Bee L1E with the IZI Brothers 6061-T6 monoblock swingarm - forged side arms, CNC finished, heat treated, and built for riders who push hard. Expect major stiffness gains, cleaner rear-end tracking, and a +10 mm ride height while keeping OEM geometry lines.