Reference: 40300-56010-002
Talaria OEM Replacement part.
Reference: 43846-56000-000
Talaria OEM Replacement part.
Reference: 40436-56000-000
Talaria OEM Replacement part.
Reference: 41-200
Chain VOCA Reenforced 420-136 for Sur-Ron LB-X and Segway X260.
Reference: GS-012
GritShift has produced an amazing upgrade for your favorite e-bike. The rear suspension linkage has been a known weak point in the stock suspension set up since day one. Many riders have complained about suspension noise and play since the bike was released. That play means there's only a matter of time till bearing failure and linkage failures are...
Reference: 191-38304-A101
An engineering masterpiece The Dorado is our most advanced downhill fork ever! It’s built with 7050 legs, an inverted construction, dual-chamber air springs, and TPC+ damping with independent high-and low-speed compression. Not to mention, hydraulic bottom-out and top-out features and Manitou’s patented HexLock 20mm thru-axle.
Reference: FX-011
Featuring a hard-wearing steel construction, this mountain bike (MTB) rear shock spring offers excellent durability as you conquer every trail-riding adventure. All standard steel springs are black and are marked with their spring rate in lbs/in (in 50lb increments) and the total travel of the spring itself. Standard black springs should only be paired...
Reference: FX-006
SLS (Super Light Steel) springs are now available from FOX for DHX and VAN rear shocks. These SLS springs are a lighter weight steel spring option offered in addition to our standard steel springs. The new SLS springs from FOX are lighter than titanium springs at more affordable prices. A proprietary surface treatment and stress relief process removes...
Reference: GS-013
Suspension triangles are an element that hold big pressure during jumps and other off-road riding. The Factory part is made from relatively cheap aluminum material that may break into 2 different pieces after excessive load or on landing. GritShift offers a reinforced billet aluminum upgrade that can handle the gnarliest conditions.
Reference: TL-S002
Quality suspension at an affordable price. The fork is adjusted for 170lbs but is also convenient for heavier rider. This is a very good upgrade over RST, DNM and KKE forks. Attention! Since late 2022 the fork as been improved with air valve instead of compression knob. This allow to make the fork much stiffer than the 1.0 version. Length : 27.5 Travel :...
Reference: TN-001
Nero C is a fork designed for those who love the feeling of a coil spring and want a fit-and-forget fork for their local bike park. The damper is identical to that used in the Nero R, incorporating high speed compression, low speed compression and rebound adjustment. Instead of the 3Air system, the Nero C employs a coil spring with tool-free preload...
Reference: FX-004
Attention! Fox SLS / Steel spring sold separately. Please choose between 450,500 and 550 lbs. Include required bushings for Talaria / Sur-Ron / Segway. ATTENTION! ABSOLUTELY NO WARRANTY ON FOX PRODUCTS USED ON TALARIA / SUR-RON / SEGWAY. Everyone loves a well performing coil shock, as good as air suspension is, nothing can quite compete with the way a...
Reference: FX-012
Featuring a hard-wearing steel construction, this mountain bike (MTB) rear shock spring offers excellent durability as you conquer every trail-riding adventure. All standard steel springs are black and are marked with their spring rate in lbs/in (in 50lb increments) and the total travel of the spring itself. Standard black springs should only be paired...
Reference: 40480-56002-000
Lightweight Design-FASTACE is a lightweight spring damper designed and manufactured for fast downhill bikes. Its inner and outer tubes, upper and lower plates, left and right legs are made of aluminum alloy with high strength and light weight, and the interior is designed with spring and oil pressure damping. Hydraulic Damping System--The hydraulic...
Reference: FX-014
Featuring a hard-wearing steel construction, this mountain bike (MTB) rear shock spring offers excellent durability as you conquer every trail-riding adventure. All standard steel springs are black and are marked with their spring rate in lbs/in (in 50lb increments) and the total travel of the spring itself. Standard black springs should only be paired...
Reference: OSB-42FSV150
Spring & Mounting Bushings included (100% bolt-on) - - - Have a look at our new Stoy 3 model 2022 which will radically transform the behavior of your bike. The Stoy 3 is a lightweight, compact, high performance shock made for enduro, freeride and downhill riding. It offers a wide range of settings, low/high speed compression and rebound, it benefits...
Reference: TL-S014/BL
Attention! Only suitable for DNM fork.
Reference: TL-S012
Attention! One kit includes 1x oil seal and 1x dust seal from highest quality materials as usual with SKF. Requires 2x kits to rebuild a complete fork!
Reference: 191-37873-A101
Once again, the Dorado is available with a coil option. The new Dorado Comp features the same 37mm chassis as the Expert, but with a more set it and forget it vibe. The coil spring provides a smooth consistent feel 100% of the time with 0% of any hassle. On the damping side of things, our ABS+ Damper offers a great adjustment range, terrific reliability,...
