Quality suspension at an affordable price. The fork is adjusted for 170lbs but is also convenient for heavier rider. This is a very good upgrade over RST, DNM and KKE forks. Attention! Since late 2022 the fork as been improved with air valve instead of compression knob. This allow to make the fork much stiffer than the 1.0 version.
Length : 27.5
Travel : 200mm
Offset : 56mm
Fork tube diameter : 38mm
Weight : 11.4 lbs
Adjustments : Compression, Preload and Rebound
Reference: 43535-56000-000
Talaria OEM Replacement part.
Reference: 13555-56000-000
Talaria OEM Replacement part.
Reference: 13213-56000-000
Talaria OEM Replacement part.
Reference: 252314-06
6061 Alloy. Includes 3mm, 6mm and 12mm spacer. Deep anodized treatments. Fits 1-1/8" and standard tapered steer tubes
Reference: GS-007
The Footpeg support brace for the Talaria Sting is now in production! These will be billet aluminum 7075, and anodized black! This is a much cleaner and more appealing design from the basic versions typically seen for the Sur Ron! This design also includes rubber grommets for anti-rattle, and tolerance play for anybody that slightly bent their brackets in...
Reference: SR-W010
6061 T6 aluminum. The bolts are made of stainless steel. Function: Turn the adjusting bolt to move the axle block forward or backward to adjust the chain tension. Compared with the original one, our chain adjuster is more beautiful and convenient. Added L/R left and right marks and adjustment scale lines. The bolt and axle block can be moved at the same...
Reference: TL-FA002
Shock protector for the Talaria Sting. The sand and mud from back wheel can damage the rear suspension with time and this is the perfect part to protect it.
Reference: TL-F001
DirtyBike Industries original rear fender design for Talaria Sting! DirtyBike's new Talaria Sting rear fender mounts onto the seat just like the stock fender. Twice as long as the stock fender and extends 7.5" from the back of the seat. No modifications needed for mounting. A necessary upgrade for off-road or on road riding, especially in wet or muddy...
Reference: FX-008
Include Drop-Crown (required) and disc brake shim sold separately by Fox. ATTENTION! ABSOLUTELY NO WARRANTY ON FOX PRODUCTS USED ON TALARIA / SUR-RON / SEGWAY. Target locked on the top step of the podium, developed in the crucible of World Cup competition, the 40 is the definitive DH race fork. A Grip2 damper with VVC, and an updated EVOL air spring,...
Reference: SR-S005
Is there play in your rear suspension? Replace those loose and gritty suspension linkage bearings with a DirtyBike off road bearing kit. Kit includes six precision needle bearings and fits all Surron Light Bee and Segway X260/160.
Reference: 42600-56000-000
Talaria OEM Replacement part.
Reference: 191-38304-A101
An engineering masterpiece The Dorado is our most advanced downhill fork ever! It’s built with 7050 legs, an inverted construction, dual-chamber air springs, and TPC+ damping with independent high-and low-speed compression. Not to mention, hydraulic bottom-out and top-out features and Manitou’s patented HexLock 20mm thru-axle.
Reference: SR-S010
6061 T6 Aluminum Made. Anodized Surface. The new bearing oil seal replaces the original sealing gasket, and the integrated design is convenient for disassembly and assembly. Local thickening to maximize product strength.
Reference: FX-003
Include required bushings for Talaria / Sur-Ron / Segway. ATTENTION! ABSOLUTELY NO WARRANTY ON FOX PRODUCTS USED ON TALARIA / SUR-RON / SEGWAY. Combining ultra-plush coil-like comfort and incredible damping prowess with the light weight of an air spring and an unmatched level of tunability, the Float X2 brings new levels of control and performance to...
Reference: FX-004
Attention! Fox SLS / Steel spring sold separately. Please choose between 450,500 and 550 lbs. Include required bushings for Talaria / Sur-Ron / Segway. ATTENTION! ABSOLUTELY NO WARRANTY ON FOX PRODUCTS USED ON TALARIA / SUR-RON / SEGWAY. Everyone loves a well performing coil shock, as good as air suspension is, nothing can quite compete with the way a...
Reference: TL-S011
This linkage will raise the seat height by 1.6'' (40mm). Recommended for taller riders
Reference: 40492-56002-000
Replacement fork seal for the Fastace Fork.
Reference: 40492-56005-000
Replacement fork seal for the Talaria Factory Fork
Reference: 141-38380-K032-D
The Dorado Comp comes stock with the Medium Coil Spring (blue). Use the tuning chart below to determine the correct spring rating for your body weight, bike, and riding style.
Reference: FX-006
SLS (Super Light Steel) springs are now available from FOX for DHX and VAN rear shocks. These SLS springs are a lighter weight steel spring option offered in addition to our standard steel springs. The new SLS springs from FOX are lighter than titanium springs at more affordable prices. A proprietary surface treatment and stress relief process removes...
Reference: RS-001-27536
More than 20 years ago, BoXXer changed the DH world when it hit the scene, featuring Charger™ 2.1 damper for unrivaled control between the tape. Ultra-low friction SKF wiper seals and race-proven Maxima Plush damping fluid all work overtime to reduce friction, noise, and provide lasting fork performance all the way to the finish corral.
Reference: WR-018/BK
** This is the V2 version of this linkage. It is built stronger and reinforced compared to the V1. Made from 7075T6 Billet Aluminum. Weights less than Other Aftermarket Risers. Available in Red, Blue or Black
Reference: RS-002-27536
More than 20 years ago, BoXXer changed the DH world when it hit the scene, featuring Charger™ 2.1 damper for unrivaled control between the tape. Ultra-low friction SKF wiper seals and race-proven Maxima Plush damping fluid all work overtime to reduce friction, noise, and provide lasting fork performance all the way to the finish corral.
Reference: 51250-YQ2A-0000
Replacement Front Axle for for Sur-Ron LB-X and Segway X260 with RST Front Fork. **The color of this axle is now lime green
Quality suspension at an affordable price. The fork is adjusted for 170lbs but is also convenient for heavier rider. This is a very good upgrade over RST, DNM and KKE forks. Attention! Since late 2022 the fork as been improved with air valve instead of compression knob. This allow to make the fork much stiffer than the 1.0 version.
Length : 27.5
Travel : 200mm
Offset : 56mm
Fork tube diameter : 38mm
Weight : 11.4 lbs
Adjustments : Compression, Preload and Rebound
@CUSTOMER_NAME@
@AUTHOR_PROFILE@ @COMMENT_ISO_COUNTRY@@COMMENT_TITLE@
@COMMENT_COMMENT@