
Reference: 43535-56000-000
Head Tube Spacer (42-30-0.5) Talaria Sting MX3 / MX4 / X3
Talaria OEM Replacement part.
The new Talaria Factory fork is finally here! Quality suspension at an affordable price. The fork is adjusted for 170lbs but is also convenient for heavier rider. This is a very good upgrade over RST, DNM and KKE forks.
Length : 27.5
Travel : 200mm
Offset : 56mm
Fork tube diameter : 38mm
Weight : 11.4 lbs
Adjustments : Compression, Preload and Rebound
Reference: 43535-56000-000
Talaria OEM Replacement part.
Reference: 13555-56000-000
Talaria OEM Replacement part.
Reference: 13213-56000-000
Talaria OEM Replacement part.
Reference: RS-001-27536
More than 20 years ago, BoXXer changed the DH world when it hit the scene, featuring Charger™ 2.1 damper for unrivaled control between the tape. Ultra-low friction SKF wiper seals and race-proven Maxima Plush damping fluid all work overtime to reduce friction, noise, and provide lasting fork performance all the way to the finish corral.
Reference: SR-S007
Mounting hardware for aftermarket shock on Talaria Sting, Sur-Ron LB-X and Segway X260.
Reference: SR-S001
Replacement DNM Volcano Fork for Sur-Ron LB-X and Segway X260.
Reference: WR-018/BK
** This is the V2 version of this linkage. It is built stronger and reinforced compared to the V1. Made from 7075T6 Billet Aluminum. Weights less than Other Aftermarket Risers. Available in Red, Blue or Black
Reference: GS-019
If you are one of the few riders that have decided the Sur Ron and Talaria Platforms cant support Mountain Bike suspension and have blown through multiple forks at thousands of dollars then this kit is for you! Introducing the GritShift Big Sender Fork conversion Kits for Sur Ron and Talaria.
Reference: MA-002
With reliability and durability at its core, the Marzocchi 58 gives you the confidence to send it. From the big hits at Rampage to that jump you’ve been itching to try but are a little too scared to - believe that the 58 can take it. This is the DH and gravity fork for working class heroes. Huge 40mm stanchions deliver plenty of stiffness and steering...
Reference: FX-012
Featuring a hard-wearing steel construction, this mountain bike (MTB) rear shock spring offers excellent durability as you conquer every trail-riding adventure. All standard steel springs are black and are marked with their spring rate in lbs/in (in 50lb increments) and the total travel of the spring itself. Standard black springs should only be paired...
Reference: SR-S010
6061 T6 Aluminum Made. Anodized Surface. The new bearing oil seal replaces the original sealing gasket, and the integrated design is convenient for disassembly and assembly. Local thickening to maximize product strength.
Reference: FX-015
Featuring a hard-wearing steel construction, this mountain bike (MTB) rear shock spring offers excellent durability as you conquer every trail-riding adventure. All standard steel springs are black and are marked with their spring rate in lbs/in (in 50lb increments) and the total travel of the spring itself. Standard black springs should only be paired...
Reference: FX-006
SLS (Super Light Steel) springs are now available from FOX for DHX and VAN rear shocks. These SLS springs are a lighter weight steel spring option offered in addition to our standard steel springs. The new SLS springs from FOX are lighter than titanium springs at more affordable prices. A proprietary surface treatment and stress relief process removes...
Reference: 191-37873-A101
Once again, the Dorado is available with a coil option. The new Dorado Comp features the same 37mm chassis as the Expert, but with a more set it and forget it vibe. The coil spring provides a smooth consistent feel 100% of the time with 0% of any hassle. On the damping side of things, our ABS+ Damper offers a great adjustment range, terrific reliability,...
Reference: 40486-56005-000
Reference: FX-013
Featuring a hard-wearing steel construction, this mountain bike (MTB) rear shock spring offers excellent durability as you conquer every trail-riding adventure. All standard steel springs are black and are marked with their spring rate in lbs/in (in 50lb increments) and the total travel of the spring itself. Standard black springs should only be paired...
Reference: FX-004
Attention! Fox SLS / Steel spring sold separately. Please choose between 450,500 and 550 lbs. Include required bushings for Talaria / Sur-Ron / Segway. ATTENTION! ABSOLUTELY NO WARRANTY ON FOX PRODUCTS USED ON TALARIA / SUR-RON / SEGWAY. Everyone loves a well performing coil shock, as good as air suspension is, nothing can quite compete with the way a...
Reference: 40499-56005-000
@CUSTOMER_NAME@
@AUTHOR_PROFILE@ @COMMENT_ISO_COUNTRY@@COMMENT_TITLE@
@COMMENT_COMMENT@