Lightweight Design-FASTACE is a lightweight spring damper designed and manufactured for fast downhill bikes. Its inner and outer tubes, upper and lower plates, left and right legs are made of aluminum alloy with high strength and light weight, and the interior is designed with spring and oil pressure damping. Hydraulic Damping System--The hydraulic damping system is inside the front fork right tube, that is, damping force generated by reciprocating motion of piston and valve plate in hydraulic oil is used to suppress vibration and impact caused by acceleration and deceleration of vehicles and road bumps. The internal damper adopts wear-resistant, low freezing point,special oil for high quality shock absorber to ensure the damping stability and reliability. Alloy Steel Spring Design--High strength alloy steel spring design is used inside the front suspension left tube, which can reduce weight and support the rider's weight compared with the conventional spring, so as to meet the various needs of your daily riding.
Reference: 13555-56000-000
Talaria OEM Replacement part.
Reference: TL-WT001
Complete Supermotor Wheel kit including everything needed for Talaria Sting MX4. Black rims with silver spokesFront tire dimension ; 70-90/17Rear tire dimension ; 90-80/1740T sprocket with matching chain220mm front and rear rotors Will fit the Talaria Sting MX3 but requires to swap out the discs for the 203mm (not included).
Reference: 27-L0118
These packages are a kit with include Motul chain lube, Motul chain clean, a chain brush, nitrile gloves, and sticker—all in a convenient care kit.
Reference: 32-08500
A new milestone in motorcycle stand technology and styling. The M64's revolutionary design delivers the most durable and lightweight motorcycle stand on the market today. The plastic stand is made from a composite blend that is exclusive to Matrix Concepts. The stand is available in seven colorways. The M64 is the ultimate stand that is used, tested, and...
Reference: GUT-002/GY
Guts Racing quality seat for Talaria Sting electric dirt bike.
Reference: 40492-56005-000
Replacement fork seal for the Talaria Factory Fork
Reference: FX-005
SLS (Super Light Steel) springs are now available from FOX for DHX and VAN rear shocks. These SLS springs are a lighter weight steel spring option offered in addition to our standard steel springs. The new SLS springs from FOX are lighter than titanium springs at more affordable prices. A proprietary surface treatment and stress relief process removes...
Reference: FX-006
SLS (Super Light Steel) springs are now available from FOX for DHX and VAN rear shocks. These SLS springs are a lighter weight steel spring option offered in addition to our standard steel springs. The new SLS springs from FOX are lighter than titanium springs at more affordable prices. A proprietary surface treatment and stress relief process removes...
Reference: FX-015
Featuring a hard-wearing steel construction, this mountain bike (MTB) rear shock spring offers excellent durability as you conquer every trail-riding adventure. All standard steel springs are black and are marked with their spring rate in lbs/in (in 50lb increments) and the total travel of the spring itself. Standard black springs should only be paired...
Reference: SR-S007
Mounting hardware for aftermarket shock on Talaria Sting, Sur-Ron LB-X and Segway X260.
Reference: SR-S009
Material: 6061 T6 Aluminum. Surface: Anodized. Reinforced rear suspension, so that the suspension part can bear huge pressure during driving. The overall thickness is increased to 22mm, and two reinforcing ribs are added for higher strength. Milled and hollowed design enhances the appearance.
Reference: OSB-42FSV150
Spring & Mounting Bushings included (100% bolt-on) - - - Have a look at our new Stoy 3 model 2022 which will radically transform the behavior of your bike. The Stoy 3 is a lightweight, compact, high performance shock made for enduro, freeride and downhill riding. It offers a wide range of settings, low/high speed compression and rebound, it benefits...
Reference: FX-008
Include Drop-Crown (required) and disc brake shim sold separately by Fox. ATTENTION! ABSOLUTELY NO WARRANTY ON FOX PRODUCTS USED ON TALARIA / SUR-RON / SEGWAY. Target locked on the top step of the podium, developed in the crucible of World Cup competition, the 40 is the definitive DH race fork. A Grip2 damper with VVC, and an updated EVOL air spring,...
Reference: FX-007
SLS (Super Light Steel) springs are now available from FOX for DHX and VAN rear shocks. These SLS springs are a lighter weight steel spring option offered in addition to our standard steel springs. The new SLS springs from FOX are lighter than titanium springs at more affordable prices. A proprietary surface treatment and stress relief process removes...
Reference: 51250-YQ2A-0000
Replacement Front Axle for for Sur-Ron LB-X and Segway X260 with RST Front Fork. **The color of this axle is now lime green
Reference: 141-38380-K032-D
The Dorado Comp comes stock with the Medium Coil Spring (blue). Use the tuning chart below to determine the correct spring rating for your body weight, bike, and riding style.
Reference: 40486-56005-000
Reference: TL-S002
Quality suspension at an affordable price. The fork is adjusted for 170lbs but is also convenient for heavier rider. This is a very good upgrade over RST, DNM and KKE forks. Attention! Since late 2022 the fork as been improved with air valve instead of compression knob. This allow to make the fork much stiffer than the 1.0 version. Length : 27.5 Travel :...
Reference: RS-003-27536
Saving every dime for your bike park pass? Keep it in the bank, BoXXer Select is built on the same great chassis as BoXXer Ultimate and features the DH-specific DebonAir™ air spring. Race-proven Maxima Plush damping fluid and the Charger™ RC damper offer out of the boXX performance with Low Speed Compression and rebound adjustment.
Lightweight Design-FASTACE is a lightweight spring damper designed and manufactured for fast downhill bikes. Its inner and outer tubes, upper and lower plates, left and right legs are made of aluminum alloy with high strength and light weight, and the interior is designed with spring and oil pressure damping. Hydraulic Damping System--The hydraulic damping system is inside the front fork right tube, that is, damping force generated by reciprocating motion of piston and valve plate in hydraulic oil is used to suppress vibration and impact caused by acceleration and deceleration of vehicles and road bumps. The internal damper adopts wear-resistant, low freezing point,special oil for high quality shock absorber to ensure the damping stability and reliability. Alloy Steel Spring Design--High strength alloy steel spring design is used inside the front suspension left tube, which can reduce weight and support the rider's weight compared with the conventional spring, so as to meet the various needs of your daily riding.
@CUSTOMER_NAME@
@AUTHOR_PROFILE@ @COMMENT_ISO_COUNTRY@@COMMENT_TITLE@
@COMMENT_COMMENT@