ATTENTION!! All kits from Kaniwaba comes with a few minor visual damages that does not affect performance. They might look like used/returned products but this is the way we receive them from Kaniwaba.
Carefully designed Pedal Kit for the TALARIA Sting. Left and right side brackets are made of a single piece to stand drops and tough conditions! This pedal kit WILL PROPEL your ebike. A pedal kit that lets your rear suspension WORK. The original pedal kit is located directly on the rear swingarm, therefore it does not spring your weight... you will feel the difference immediately going over obstacles, plus the turning is greatly improved! Plug and Play pedal kit fixed to the frame! You just disassemble the existing side brackets and install the pedal kit. Easy setup. Adjust the kit to your bike using the stainless steel collars. You may easily change between pedals or footpegs. Just install the footpegs or the cranks without removing the pedal kit, you can also remove the spindle. You choose! Maintenance free. New design is maintenance free since it has sealed cartridge bearings. Also works as a brace bar. Reduced wobble. No wobble, a common problem with the OEM kit. Cranksets compatible. This kit is compatible with JIS square tapered cranksets, no major crank offset is required. Aluminium made in order to reduce weight. With a weight of around 3 Lb (1.5 kg) it is lighter than the OEM kit. The spindle is made of stainless steel. Durable Materials. Parts made of aluminum and stainless steel. It will last a long time. Cranks & Pedals included !
Reference: 73-3603L
In motion air is forced through multiple air intake vents, then passed through aligned vent channels in the EPS and exits out multiple rear exhaust vents, keeping you cool and comfortable
Reference: 27-L033
Very high lubricant power to withstand successive full speed start-ups and stops in city driving conditions. Oil film thickness remains suficient in the various driving conditions, idle, sharp accelerations, full power. Extreme-pressure and anti-wear additives to increase set lifetime operating under very high revolutions and shocks during riding....
Reference: TL-FPSB001
**These braces will only fit, without modification, the January shipment if you purchased your Talaria from us. For installation if you have the V1 foot peg holders: check fitment first without o-ring. If there is a gap, install one o-ring. If the gap persist, add the second o-ring. For installation if you have the V2 foot peg holders: drill the third...
Reference: 301-39635-A001
Great Upgrade for the Talaria Sting, Sur-Ron LB-X and Segway X260. This handlebar is higher than original and allow a better control of the bike for taller riders. ** 3" rise from the center clamp. So 2" higher than original handlebars
Reference: KA-002
ATTENTION!! All kits from Kaniwaba comes with a few minor visual damages that does not affect performance. They might look like used/returned products but this is the way we receive them from Kaniwaba. This heavy duty pedal system is perfect for the guys wanting to use pedals. A pedal kit that lets your rear suspension WORK. The original pedal kit is...
Reference: AB-TG002
TALARIA YEAR-ROUND! Low rolling resistance concept to allow maximum battery autonomy. Lightweight design & Large footprint. Use original rear suspension. It comes with everything to easily swap from wheels to ski and track.
Reference: 43171-56000-000
Talaria OEM Replacement part.
Reference: GS-007
The Footpeg support brace for the Talaria Sting is now in production! These will be billet aluminum 7075, and anodized black! This is a much cleaner and more appealing design from the basic versions typically seen for the Sur Ron! This design also includes rubber grommets for anti-rattle, and tolerance play for anybody that slightly bent their brackets in...
Reference: SR-F094
Looks much better than stock key. No need to cut plastic off, this has been machined so the complete key fits in there. We suggest to add a tiny drop of glue if you feel the key rattling inside. Decorative item.
Reference: SR-F073
6061 T6 Aluminum anodized adjustable kickstand than can be adjusted up and down 1.2'' (30mm). Designed to match different wheels and suspension size. The side support base is enlarged to increase the contact area with the ground. The bike can site on it more stable. CNC machined parts are lighter than the original bike.
Reference: 40430-56000-002
Talaria OEM Replacement part.
Reference: GS-008
Talaria Stings OEM design for the breather leaves an open hose mounted next to the rear shock. If you have ever ridden a Sur Ron or other E-moto's. This is the least ideal place for an open line. Mud, dirt, and water spray, from your tire, will likely be able to enter your, gear case and compromise longevity. The GritShift R&D team has designed a...
Reference: 40010-56000-002
Talaria OEM Replacement part.
Reference: 40621-56000-000
Talaria OEM Replacement part.
Reference: SR-F064
The NTC Designs Adjustable Kickstand provides an easily modifiable solution to riders who have raised or lowered their bikes with various upgrades. This kickstand safely extends to roughly 1.5" beyond the stock geometry and is 0.75" shorter when fully retracted.
Reference: SR-F074
6061 T6 Aluminum anodized adjustable kickstand than can be adjusted up and down 1.2'' (30mm). Designed to match different wheels and suspension size. The side support base is enlarged to increase the contact area with the ground. The bike can site on it more stable. CNC machined parts are lighter than the original bike. Must re-use OEM springs, kickstand...
Reference: 42052-56000-000
Talaria OEM Replacement part.
ATTENTION!! All kits from Kaniwaba comes with a few minor visual damages that does not affect performance. They might look like used/returned products but this is the way we receive them from Kaniwaba.
Carefully designed Pedal Kit for the TALARIA Sting. Left and right side brackets are made of a single piece to stand drops and tough conditions! This pedal kit WILL PROPEL your ebike. A pedal kit that lets your rear suspension WORK. The original pedal kit is located directly on the rear swingarm, therefore it does not spring your weight... you will feel the difference immediately going over obstacles, plus the turning is greatly improved! Plug and Play pedal kit fixed to the frame! You just disassemble the existing side brackets and install the pedal kit. Easy setup. Adjust the kit to your bike using the stainless steel collars. You may easily change between pedals or footpegs. Just install the footpegs or the cranks without removing the pedal kit, you can also remove the spindle. You choose! Maintenance free. New design is maintenance free since it has sealed cartridge bearings. Also works as a brace bar. Reduced wobble. No wobble, a common problem with the OEM kit. Cranksets compatible. This kit is compatible with JIS square tapered cranksets, no major crank offset is required. Aluminium made in order to reduce weight. With a weight of around 3 Lb (1.5 kg) it is lighter than the OEM kit. The spindle is made of stainless steel. Durable Materials. Parts made of aluminum and stainless steel. It will last a long time. Cranks & Pedals included !
@CUSTOMER_NAME@
@AUTHOR_PROFILE@ @COMMENT_ISO_COUNTRY@@COMMENT_TITLE@
@COMMENT_COMMENT@