Reference: TL-2500-SRCL
Complete Improved V2 Subframe Talaria X3 Concept (Silver)
Talaria OEM Replacement part. Improved V2 Talaria XXX Stronger Seat Frame. Seat, Tail Light, Harness and Tail fender included.
Talaria OEM Replacement part. Shorter kickstand made to fit 17 inch wheel from the X3 concept. can be used with supermoto wheels on MX3-MX4 to have proper leaning angle. approx 1 inch shorter than MX3-MX4 stand.
Reference: TL-2500-SRCL
Talaria OEM Replacement part. Improved V2 Talaria XXX Stronger Seat Frame. Seat, Tail Light, Harness and Tail fender included.
Reference: TL-FPSB001
**These braces will only fit, without modification, the January shipment if you purchased your Talaria from us. For installation if you have the V1 foot peg holders: check fitment first without o-ring. If there is a gap, install one o-ring. If the gap persist, add the second o-ring. For installation if you have the V2 foot peg holders: drill the third...
Reference: TL-S002
Quality suspension at an affordable price. The fork is adjusted for 170lbs but is also convenient for heavier rider. This is a very good upgrade over RST, DNM and KKE forks. Attention! Since late 2022 the fork as been improved with air valve instead of compression knob. This allow to make the fork much stiffer than the 1.0 version. Length : 27.5 Travel :...
Reference: 50180-56010-000
Talaria OEM Replacement part. Attention! Only work with green connector wire. Only looking for the screws? We have them in the OEM shop ; 10429-56000-000
Reference: 35230-56000-000
Talaria OEM Replacement part.