Oversized upgrade floating disc for any bike, will require the proper caliper spacers separately. Significant Brake upgrade over stock rotors.
250mm caliper adapters required! Sold separately. Make sure you pick the right model for your fork. Please contact us if you are unsure which model you need.
Can be installed on any bike model, as long as a 250mm caliper spacer is used.
It will require bleeding the calipers on bikes running 2.0mm original discs (Sur-ron Light bee, Talaria MX3). Not required on the Talaria xXx / MX4 as they are 2.3mm from factory.
Reference: 13554-56000-000
Talaria OEM Replacement part.
Reference: 50190-56001-000
Talaria OEM Replacement part.
Reference: 301-39635-A001
Great Upgrade for the Talaria Sting, Sur-Ron LB-X and Segway X260. This handlebar is higher than original and allow a better control of the bike for taller riders. ** 3" rise from the center clamp. So 2" higher than original handlebars
Reference: SR-F101
Made without any logo/branding. Only shows the beautiful deep gloss carbon fiber finish. Must reuse original locking system and rubber spacer to hold battery in place. double sided tape required (not included) to glue the rubber spacer back into place. Looks much better than original made of plastic!
Reference: SH-B017
Direct fit upgrade floating disc for a xXx / MX4 bike!
Reference: 35591-56A70-000
Talaria OEM Replacement part.
Reference: SH-B022
Thicker discs than original - Bleeding required!
Reference: SH-B020
Direct fit upgrade floating disc for a xXx / MX4 bike!
Reference: SH-B016
Oversized 250mm upgrade floating disc for Talaria MX3 / MX4 / xXx, will require the proper caliper spacers separately. Significant Brake upgrade over stock rotors.
Reference: 35470-56A70-000
Talaria OEM Replacement part.
Reference: DB007W
223mm fixed-mount Galfer rotor for mountain biking. Every high-quality, Galfer-patented Wave rotor is made from a proprietary mix of virgin high carbon 420 stainless steel, laser cut (never stamped), double disc-parallel ground to assure perfect parallel flatness and heat treated to each specific application. Seamlessly replaces stock rotor. Full...
Reference: DB004W2
203mm fixed-mount Galfer rotor for mountain biking. Every high-quality, Galfer-patented Wave rotor is made from a proprietary mix of virgin high carbon 420 stainless steel, laser cut (never stamped), double disc-parallel ground to assure perfect parallel flatness and heat treated to each specific application. Seamlessly replaces stock rotor. Full...