- -10%
Direct fit upgrade floating disc for a xXx / MX4 bike!
Bolt on fitment on a Talaria xXx / MX4 - no modifications required!
Can also be used as an upgrade on Talaria MX3 - However, it requires both bleeding the calipers and +10mm spacers (Sold separately). NOT required on the xXx / MX4!
Also available in 250mm if you need even more braking power.
Reference: 40500-56000-000
Necessary to sucessfully install a new fork, can't be re-used from the previous one, and not included in many fork brands. This model will fit most original forks (RST, DNM, Fastace, Factory, KKE) Please measure the INSIDE diameter of the steer tube to order the correct unit. (22mm / 0.866'') Aftermarket forks (Fox, Marzocchi, Manitou, Rockshox, BOS,...
Reference: 40492-56005-000
Replacement fork seal for the Talaria Factory Fork
Reference: 43751-56A00-000
Talaria OEM Replacement part.
Reference: SR-HA025
Everything needed to increase height by 1'' on any direct mount stem.
Reference: 35530-56A01-000
Talaria OEM Replacement part.
Reference: SH-B022
Thicker discs than original - Bleeding required!
Reference: DB004W2
203mm fixed-mount Galfer rotor for mountain biking. Every high-quality, Galfer-patented Wave rotor is made from a proprietary mix of virgin high carbon 420 stainless steel, laser cut (never stamped), double disc-parallel ground to assure perfect parallel flatness and heat treated to each specific application. Seamlessly replaces stock rotor. Full...
Reference: 35470-56A70-000
Talaria OEM Replacement part.
Reference: 35591-56A70-000
Talaria OEM Replacement part.
Reference: SH-B021
Oversized upgrade floating disc for any bike, will require the proper caliper spacers separately. Significant Brake upgrade over stock rotors.
Reference: SH-B016
Oversized 250mm upgrade floating disc for Talaria MX3 / MX4 / xXx, will require the proper caliper spacers separately. Significant Brake upgrade over stock rotors.
Reference: DB007W
223mm fixed-mount Galfer rotor for mountain biking. Every high-quality, Galfer-patented Wave rotor is made from a proprietary mix of virgin high carbon 420 stainless steel, laser cut (never stamped), double disc-parallel ground to assure perfect parallel flatness and heat treated to each specific application. Seamlessly replaces stock rotor. Full...
Reference: SH-B020
Direct fit upgrade floating disc for a xXx / MX4 bike!