We have spent multiple months working with Gates to produce a product to exceed what is currently on the market. After several meetings and test, We have found the optimal belt width for the Sur Ron and Segway is 16 mm, there have been many belts made available in the 17mm width with the thought being that the widest possible fit, will be the strongest, unfortunately, that has come to be untrue and confirmed during our time working with Gates-Belts engineers. Most commonly due to the slight misalignment of the motor and jackshaft pulley, the belt can push its way to the outside edge and begin causing friction on the sides of the belt. This increased friction will cause pre-mature failure of most belts, and unwanted pulley wear. Not to mention belt tracking which will limit the belt's actual contact points on your pulley.
Reference: NU-CTHR
Nucular Replacement parts. Wired for a Nucular screen, will require to be re-wired for any other controller brand.
Reference: SR-F097
Replaces the stock plastic key holder (which cracks easily). Made from Aluminium, CNC machined. Problem solved.
Reference: SR-TC110
Premium quality Chain designed for Talaria, Sur-Ron and Segway dirt ebike with 54T Sprocket.
Reference: 40320-56001-000
Talaria OEM Replacement part. Shorter kickstand made to fit 17 inch wheel from the X3 concept. can be used with supermoto wheels on MX3-MX4 to have proper leaning angle. approx 1 inch shorter than MX3-MX4 stand.
Reference: 31359-54001-000
Talaria OEM Replacement part.
We have spent multiple months working with Gates to produce a product to exceed what is currently on the market. After several meetings and test, We have found the optimal belt width for the Sur Ron and Segway is 16 mm, there have been many belts made available in the 17mm width with the thought being that the widest possible fit, will be the strongest, unfortunately, that has come to be untrue and confirmed during our time working with Gates-Belts engineers. Most commonly due to the slight misalignment of the motor and jackshaft pulley, the belt can push its way to the outside edge and begin causing friction on the sides of the belt. This increased friction will cause pre-mature failure of most belts, and unwanted pulley wear. Not to mention belt tracking which will limit the belt's actual contact points on your pulley.
