ATTENTION!! All kits from Kaniwaba comes with a few minor visual damages that does not affect performance. They might look like used/returned products but this is the way we receive them from Kaniwaba.
Carefully designed Pedal Kit for the SurRon. This is a pedal kit that lets your rear suspension WORK. The original pedal kit is located directly on the rear swingarm, therefore it does not spring your weight... you will feel the difference immediately going over obstacles, plus the turning is greatly improved! Plug and Play pedal kit fixed to the frame! You just disassemble the existing side brackets and install the pedal kit. This pedal kit will not propel your ebike. Easy setup. Adjust the kit to your bike using the stainless steel collars. You may easily change between pedals or footpegs (and you have two footpeg positions!). Just install the footpegs or the cranks without removing the pedal kit, you can also remove the spindle. You choose! Maintenance free. New design is maintenance free since it has sealed cartridge bearings. Brace bar. Also works as a brace bar. Reduced wobble. Little to no wobble of the chain, a common problem with the OEM kit since it is not connected to the chain. Cranksets compatible. This kit is compatible with JIS square tapered cranksets, no major crank offset is required. If the crank has no offset, the maximum compatible length is 160mm. OEM Crankset is compatible. Aluminium made in order to reduce weight. With a weight of around 3 Lb (1.5 kg) it is lighter than the OEM kit. The spindle is made of stainless steel. Durable Materials. Parts made of aluminum and stainless steel. It will last a long time.
