Quality suspension at an affordable price. The fork is adjusted for 170lbs but is also convenient for heavier rider. This is a very good upgrade over RST, DNM and KKE forks. Attention! Since late 2022 the fork as been improved with air valve instead of compression knob. This allow to make the fork much stiffer than the 1.0 version.
Length : 27.5
Travel : 200mm
Offset : 56mm
Fork tube diameter : 38mm
Weight : 11.4 lbs
Adjustments : Compression, Preload and Rebound
Reference: 43535-56000-000
Talaria OEM Replacement part.
Reference: 13555-56000-000
Talaria OEM Replacement part.
Reference: 13213-56000-000
Talaria OEM Replacement part.
Reference: 13051-56000-000
Talaria OEM Replacement part.
Reference: 191-38304-A101
An engineering masterpiece The Dorado is our most advanced downhill fork ever! It’s built with 7050 legs, an inverted construction, dual-chamber air springs, and TPC+ damping with independent high-and low-speed compression. Not to mention, hydraulic bottom-out and top-out features and Manitou’s patented HexLock 20mm thru-axle.
Reference: 41-200
Chain VOCA Reenforced 420-136 for Sur-Ron LB-X and Segway X260.
Reference: 350-11708
Ultra-lightweight minimalist race glove with a soft hand feel. Conductive silicone contact points for touchscreen use. Spandex mesh finger sidewall and gusset for improved airflow and lightweight feel. Single layer fully perforated synthetic leather palm with minimal padding for improved airflow and a lightweight feel. Terry cloth wipe on thumb....
Reference: 13213-56000-000
Talaria OEM Replacement part.
Reference: FX-008
Include Drop-Crown (required) and disc brake shim sold separately by Fox. ATTENTION! ABSOLUTELY NO WARRANTY ON FOX PRODUCTS USED ON TALARIA / SUR-RON / SEGWAY. Target locked on the top step of the podium, developed in the crucible of World Cup competition, the 40 is the definitive DH race fork. A Grip2 damper with VVC, and an updated EVOL air spring,...
Reference: FX-009
Include Drop-Crown (required) and disc brake shim sold separately by Fox. ATTENTION! ABSOLUTELY NO WARRANTY ON FOX PRODUCTS USED ON TALARIA / SUR-RON / SEGWAY. Target locked on the top step of the podium, developed in the crucible of World Cup competition, the 40 is the definitive DH race fork. A Grip2 damper with VVC, and an updated EVOL air spring,...
Reference: 40480-56002-000
Lightweight Design-FASTACE is a lightweight spring damper designed and manufactured for fast downhill bikes. Its inner and outer tubes, upper and lower plates, left and right legs are made of aluminum alloy with high strength and light weight, and the interior is designed with spring and oil pressure damping. Hydraulic Damping System--The hydraulic...
Reference: 191-38304-A101
An engineering masterpiece The Dorado is our most advanced downhill fork ever! It’s built with 7050 legs, an inverted construction, dual-chamber air springs, and TPC+ damping with independent high-and low-speed compression. Not to mention, hydraulic bottom-out and top-out features and Manitou’s patented HexLock 20mm thru-axle.
Reference: SIR-005-MED-SC-BK
We took the race-proven F43 chassis — the gold standard in high-performance e-moto suspension — and resized and lightened it for compact e-moto. The result is a fork that rides like it belongs on a full-size race bike.
Reference: OSB-42FCV
Taking the mytic name of the fork that equipped the mountain bikes of Nicolas Vouilloz and Anne-Caroline Chausson during their great years in the downhill world championships, the Bos Suspension Obsys 42 FCV fork has made a very noticed arrival. Our new Obsys 42 FCV dual crown fork shows its impressive characteristics right away. It's built to win.
Quality suspension at an affordable price. The fork is adjusted for 170lbs but is also convenient for heavier rider. This is a very good upgrade over RST, DNM and KKE forks. Attention! Since late 2022 the fork as been improved with air valve instead of compression knob. This allow to make the fork much stiffer than the 1.0 version.
Length : 27.5
Travel : 200mm
Offset : 56mm
Fork tube diameter : 38mm
Weight : 11.4 lbs
Adjustments : Compression, Preload and Rebound
