List of products by brand NTC Design

Reference: SH-B007

Hydrolic Rear Foot Brake Sur-Ron LB-X / Segway X260

Custom rear hydraulic brake pedal for Sur Ron. Hydraulic master cylinder activates rear brake (replacing hand operated master cylinder) . Due to clearance issues, front most peg position is not available. Bike Requirements : Master cylinder uses only dot4/dot5.1 brake fluid and is incompatible with brakes that use mineral oil such as stock brakes. We...

Reference: SH-B008

Hydrolic Rear Foot Brake with Regen Sur-Ron LB-X / Segway X260

Custom rear hydraulic with regen / electronic brake pedal for Sur Ron. Hydraulic master cylinder activates rear brake (replacing hand-operated master cylinder) and position sensor can control motor regen or ASI BAC or Sin-Tech motor controllers (not compatible with stock Sur-Ron motor controller). Due to clearance issues, the front-most peg position is...

Reference: SH-B009

Rear Foot Brake (Regen only) Sur-Ron LB-X / Segway X260

Custom rear regen / electronic pedal for Sur Ron. This electronic foot pedal can be used with Sin-Tech or ASI BAC controllers that have an analog regen braking input. Fully adjustable pedal upper and lower travel limits. Due to clearance issues, front most peg position can not be used. Pedal outputs 0.15 to 3.7v single for pedal position. This kit is not...

Reference: SH-B010/AL

Rear Disc Guard CNC Aluminium Talaria Sting MX3 / Sur-Ron LB-X

Reference: SH-B010/BK

Rear Disc Guard CNC Black Talaria Sting MX3 / Sur-Ron LB-X

Reference: SH-B011/AL

Rear Dual Caliper Bracket CNC Aluminium Sur-Ron LB-X / Segway X260

Running our hydraulic rear foot brake and want to keep your stock or aftermarket hand brake? This dual caliper bracket enables the use of 2 independent rear brakes. Machined from 6061 aluminum, this replaces the stock cast bracket and mounts 2 calipers at a 90-degree angle. The second caliber can be stock or any compatible aftermarket caliper.

Reference: SH-B011/BK

Rear Dual Caliper Bracket CNC Black Sur-Ron LB-X / Segway X260

Running our hydraulic rear foot brake and want to keep your stock or aftermarket hand brake? This dual caliper bracket enables the use of 2 independent rear brakes. Machined from 6061 aluminum, this replaces the stock cast bracket and mounts 2 calipers at a 90-degree angle. The second caliber can be stock or any compatible aftermarket caliper.

Reference: SR-BE006

ASI BAC4000 controller Mount CNC Aluminum Talaria / Sur-Ron / Segway

6061 Aluminum CNC machined Low Profile ASI BAC4000 mounting kit for Sur Ron. The bracket fully protects the delicate front of the ASI controller from impacts. Mounts to existing holes on the frame with included aluminum mounting arms (no plastic spacers). All Colored parts are type 2 anodized. Silver is Raw. Simple install and includes all mounting hardware.

Reference: SR-BE007

ASI BAC4000 controller Mount CNC Black Talaria / Sur-Ron / Segway

6061 Aluminum CNC machined Low Profile ASI BAC4000 mounting kit for Sur Ron. The bracket fully protects the delicate front of the ASI controller from impacts. Mounts to existing holes on the frame with included aluminum mounting arms (no plastic spacers). All Colored parts are type 2 anodized. Silver is Raw. Simple install and includes all mounting hardware.

Reference: SR-BE004

ASI BAC8000 controller Mount CNC Aluminum Talaria / Sur-Ron / Segway

For BAC8000

Reference: SR-BE005

ASI BAC8000 controller Mount CNC Black Talaria / Sur-Ron / Segway

For BAC8000

Reference: SR-F066

Ignition Mount Plate NTC Design CNC Aluminium Sur-Ron / Segway

This custom ignition mount plate is machined from 6061 Billet Aluminum. Direct replacement for the cost cutting plastic stock plate that comes from the factory.

Reference: SR-F067

Ignition Mount Plate NTC Design CNC Black Sur-Ron / Segway

This custom ignition mount plate is machined from 6061 Billet Aluminum. Direct replacement for the cost cutting plastic stock plate that comes from the factory.

Reference: SR-F060

Billet Peg Bracket Kit NTC Design CNC Aluminium Sur-Ron / Segway

Direct replacement Sur Ron peg brackets in stock geometry (deletes front peg mount position). 5-axis machined from solid 6061 billet aluminum. Replaces weak stock cast aluminum brackets. Pair includes matching left and right brackets. Strong 0.5” bracket thickness will not bend or fail. Kickstand is repositioned outward 3/16” to accommodate wider tires....

Reference: SR-F061

Billet Peg Bracket Kit NTC Design CNC Black Sur-Ron / Segway

Direct replacement Sur Ron peg brackets in stock geometry (deletes front peg mount position). 5-axis machined from solid 6061 billet aluminum. Replaces weak stock cast aluminum brackets. Pair includes matching left and right brackets. Strong 0.5” bracket thickness will not bend or fail. Kickstand is repositioned outward 3/16” to accommodate wider tires....

Reference: SR-F062

20mm Lowering Peg Bracket Set (With Support Brace) NTC Design CNC Aluminium Sur-Ron / Segway

Direct replacement Sur Ron peg brackets 20mm lower than stock geometry. This setup accommodates longer legs as well as a lower center of gravity. 5-axis machined from solid 6061 billet aluminum. Replaces weak stock cast aluminum brackets. Pair includes matching left and right brackets along with a brace for added strength. Strong 0.5” bracket thickness...

Reference: SR-F063

20mm Lowering Peg Bracket Set (With Support Brace) NTC Design CNC Black Sur-Ron / Segway

Direct replacement Sur Ron peg brackets 20mm lower than stock geometry. This setup accommodates longer legs as well as a lower center of gravity. 5-axis machined from solid 6061 billet aluminum. Replaces weak stock cast aluminum brackets. Pair includes matching left and right brackets along with a brace for added strength. Strong 0.5” bracket thickness...

Reference: SR-HA014/V1

Protective Case for Eggrider Display NTC-Design CNC Aluminium

Solid one-piece 6061 billet aluminum protective case for Egg Rider display. This rugged case protects the fragile Egg Rider from damages as well as replaces the plastic bar clamp with an all-aluminum 2 screw clamp (similar to brake lever clamp). Designed and manufactured in the USA. Quick and easy install. Attention! Does not work with the Talaria...

Reference: SR-HA015/V1

Protective Case for Eggrider Display NTC-Design CNC Black

Solid one-piece 6061 billet aluminum protective case for Egg Rider display. This rugged case protects the fragile Egg Rider from damages as well as replaces the plastic bar clamp with an all-aluminum 2 screw clamp (similar to brake lever clamp). Designed and manufactured in the USA. Quick and easy install. Attention! Does not work with the Talaria...

Reference: SR-HA016/V1

Protective Case for Eggrider Display NTC-Design CNC Red

Solid one-piece 6061 billet aluminum protective case for Egg Rider display. This rugged case protects the fragile Egg Rider from damages as well as replaces the plastic bar clamp with an all-aluminum 2 screw clamp (similar to brake lever clamp). Designed and manufactured in the USA. Quick and easy install. Attention! Does not work with the Talaria...

Reference: SR-HA017/V1

Protective Case for Eggrider Display NTC-Design CNC Blue

Solid one-piece 6061 billet aluminum protective case for Egg Rider display. This rugged case protects the fragile Egg Rider from damages as well as replaces the plastic bar clamp with an all-aluminum 2 screw clamp (similar to brake lever clamp). Designed and manufactured in the USA. Quick and easy install. Attention! Does not work with the Talaria...

Reference: SR-F064

Adjustable Kickstand NTC Design CNC Aluminium Talaria / Sur-Ron / Segway

The NTC Designs Adjustable Kickstand provides an easily modifiable solution to riders who have raised or lowered their bikes with various upgrades. This kickstand safely extends to roughly 1.5" beyond the stock geometry and is 0.75" shorter when fully retracted.

Reference: SR-HA018

Protective Case for Nucular Display NTC-Design CNC Aluminum

6061 Aluminum CNC machined ASI BAC4000 mounting kit for Sur Ron. The bracket fully protects the delicate front of the ASI controller from impacts. Mounts to existing holes on the frame with included aluminum mounting arms (no plastic spacers). All parts are type 2 anodized. Simple install and includes all mounting hardware.

Reference: SR-F065

Adjustable Kickstand NTC Design CNC Black Talaria / Sur-Ron / Segway

The NTC Designs Adjustable Kickstand provides an easily modifiable solution to riders who have raised or lowered their bikes with various upgrades. This kickstand safely extends to roughly 1.5" beyond the stock geometry and is 0.75" shorter when fully retracted.

Reference: SR-HA019

Protective Case for Nucular Display NTC-Design CNC Black

6061 Aluminum CNC machined ASI BAC4000 mounting kit for Sur Ron. The bracket fully protects the delicate front of the ASI controller from impacts. Mounts to existing holes on the frame with included aluminum mounting arms (no plastic spacers). All parts are type 2 anodized. Simple install and includes all mounting hardware.