Required to run a 220mm disc on a bike that was originally 203mm. Universal, will fit any E-bike.
Attention! 2 sets required if you need both the front and back.
Reference: 32300-YQ2A-0001
Replacement Seat V2 for Sur-Ron LB-X and Segway X260.
Reference: 353-0654
High-performance hypoid petroleum gear oil • For transmission, shaft drive and hypoid gear service • Exceeds API, GL 4 & 5 specifications • Rust and corrosion resistant 80w90 Gear Oil
Reference: TL-FPSB001
For installation if you have the V2 foot peg holders: drill the third hole closest to the rear tire on both foot peg holders with a 12mm drill bit (preferred) or a 1/2" drill bit (if you don't have a 12mm drill bit).
Reference: NU-TAL001/BK
Plug & Ride Kit for Talaria Sting MX3 and MX4. Up to 30% more power оn standard 60V battery and up to 300% on 72V battery.
Reference: 01-04190
A versatile performer with a tough nylon carcass and raised dimpled knobs that work well in a variety of terrain. Narrow knobby configuration means less of an environmental foot print on the trail. 4 ply rated. DOT approved. Not intended for extended highway use. All sizes will work for front or rear fitment. 2.85kg / 6.28 lbs
Reference: 43751-56A00-000
Talaria OEM Replacement part.
Reference: SB002
This adapter will allow you to run a bicycle rotor up to 20mm larger than standard size. This is typically used to run the 203 / 223mm Galfer USA oversize brake rotor.
Reference: SH-B024
Required to run oversized 250mm brake disc.
Reference: 250390-01
Used for front brake disc alignment fine tuning
Reference: SH-B025
Required to run oversized 250mm brake disc.
Reference: 250390-02
Used for front brake disc alignment fine tuning
Required to run a 220mm disc on a bike that was originally 203mm. Universal, will fit any E-bike.
