Suspension

Reference: FX-008

Fork Fox 40 Black Talaria Sting MX3, MX4, X3 / Sur-Ron LB-X

Include Drop-Crown (required) and disc brake shim sold separately by Fox. ATTENTION! ABSOLUTELY NO WARRANTY ON FOX PRODUCTS USED ON TALARIA / SUR-RON / SEGWAY.  Target locked on the top step of the podium, developed in the crucible of World Cup competition, the 40 is the definitive DH race fork. A Grip2 damper with VVC, and an updated EVOL air spring,...

Reference: FX-009

Fork Fox 40 Orange Talaria Sting MX3, MX4, X3 / Sur-Ron LB-X

Include Drop-Crown (required) and disc brake shim sold separately by Fox. ATTENTION! ABSOLUTELY NO WARRANTY ON FOX PRODUCTS USED ON TALARIA / SUR-RON / SEGWAY.  Target locked on the top step of the podium, developed in the crucible of World Cup competition, the 40 is the definitive DH race fork. A Grip2 damper with VVC, and an updated EVOL air spring,...

Reference: 191-38304-A101

Fork Manitou Dorado Expert 27.5 Talaria Sting MX3, MX4, X3 / Sur-Ron LB-X

An engineering masterpiece The Dorado is our most advanced downhill fork ever! It’s built with 7050 legs, an inverted construction, dual-chamber air springs, and TPC+ damping with independent high-and low-speed compression. Not to mention, hydraulic bottom-out and top-out features and Manitou’s patented HexLock 20mm thru-axle.

Reference: OSB-42FCV

High-End Fork BOS Obsys 42 FCV Talaria / Sur-Ron

Taking the mytic name of the fork that equipped the mountain bikes of Nicolas Vouilloz and Anne-Caroline Chausson during their great years in the downhill world championships, the Bos Suspension Obsys 42 FCV fork has made a very noticed arrival. Our new Obsys 42 FCV dual crown fork shows its impressive characteristics right away. It's built to win.

Reference: 40480-56002-000

Fork Fastace 27.5'' Talaria / Sur-Ron

Lightweight Design-FASTACE is a lightweight spring damper designed and manufactured for fast downhill bikes. Its inner and outer tubes, upper and lower plates, left and right legs are made of aluminum alloy with high strength and light weight, and the interior is designed with spring and oil pressure damping. Hydraulic Damping System--The hydraulic...

Reference: TL-S002

Fork Talaria Factory 2.0 27.5'' Talaria / Sur-Ron

Quality suspension at an affordable price. The fork is adjusted for 170lbs but is also convenient for heavier rider. This is a very good upgrade over RST, DNM and KKE forks. Attention! Since late 2022 the fork as been improved with air valve instead of compression knob. This allow to make the fork much stiffer than the 1.0 version. Length : 27.5 Travel...

Reference: SIR-005-MED-SC-BK

Fork Sirris F43 CMX Tune Sur-Ron LBX / Talaria Sting MX3-MX4-X3

We took the race-proven F43 chassis — the gold standard in high-performance e-moto suspension — and resized and lightened it for compact e-moto. The result is a fork that rides like it belongs on a full-size race bike.

Reference: FX-003

Rear Shock Fox Float X2 Factory 10.5x3.5 Talaria Sting MX3, MX4, X3 / Sur-Ron LB-X

Include required bushings for Talaria / Sur-Ron / Segway. ATTENTION! ABSOLUTELY NO WARRANTY ON FOX PRODUCTS USED ON TALARIA / SUR-RON / SEGWAY.  Combining ultra-plush coil-like comfort and incredible damping prowess with the light weight of an air spring and an unmatched level of tunability, the Float X2 brings new levels of control and performance to...

Reference: FX-004

Rear Shock Fox DHX2 2022 10.5x3.5 (Spring sold separately) Talaria / Sur-Ron

Attention! Fox SLS / Steel spring sold separately. Please choose between 450,500 and 550 lbs. Include required bushings for Talaria / Sur-Ron / Segway. ATTENTION! ABSOLUTELY NO WARRANTY ON FOX PRODUCTS USED ON TALARIA / SUR-RON / SEGWAY.  Everyone loves a well performing coil shock, as good as air suspension is, nothing can quite compete with the way a...

Reference: SR-S008

Rear Shock DNM RCP2S 250x70mm 550lbs spring (shorter)

Shorter Rear Shock DNM RCP2S for Talaria sting that allow to lower rear height. This is great for smaller people and allow more flat seat. Comes with a standard 550 lbs spring

Reference: OSB-42FSV150

Rear Shock BOS STBX Stoy 3 267x89mm Talaria / Sur-Ron

Spring & Mounting Bushings included (100% bolt-on) - - - Have a look at our new Stoy 3 model 2022 which will radically transform the behavior of your bike. The Stoy 3 is a lightweight, compact, high performance shock made for enduro, freeride and downhill riding. It offers a wide range of settings, low/high speed compression and rebound, it benefits...

Reference: TL-S015

Rear Shock KKE 10.5x3.5 Sur-Ron LBX / Talaria Sting MX3 / MX4

Reference: 42600-56000-000

Rear Shock Fastace 10.5x3.5 550lbs Talaria Sting MX3 / MX4 / Sur-Ron

Talaria OEM Replacement part.

Reference: 42600-56003-000

Rear Shock Talaria Factory 265mm Talaria Sting MX3 / MX4

Talaria OEM Replacement part.

Reference: 42800-5600Z-000

Rear Linkage Assembly (complete) Talaria Sting MX3 / MX4 / MX5

Talaria OEM Replacement part.

Reference: TL-S003/AL

Rear Suspension Linkage CNC Aluminum Talaria Sting

Reference: TL-S003/BK

Rear Suspension Linkage CNC Black Talaria Sting

Reference: TL-S004/AL

Rear Suspension Triangle CNC Aluminium Talaria Sting

Reference: TL-S004/BK

Rear Suspension Triangle CNC Black Talaria Sting MX3

Reference: GS-012

Reinforced Rear Suspension linkage Gritshift Talaria Sting

GritShift has produced an amazing upgrade for your favorite e-bike. The rear suspension linkage has been a known weak point in the stock suspension set up since day one. Many riders have complained about suspension noise and play since the bike was released. That play means there's only a matter of time till bearing failure and linkage failures are...

Reference: GS-013

Reinforced Rear Suspension Triangle Gritshift Talaria Sting

Suspension triangles are an element that hold big pressure during jumps and other off-road riding. The Factory part is made from relatively cheap aluminum material that may break into 2 different pieces after excessive load or on landing. GritShift offers a reinforced billet aluminum upgrade that can handle the gnarliest conditions.

Reference: 42700-56020-000

Replacement suspension Triangle Talaria Sting MX4 / MX5

Talaria OEM Replacement part.

Reference: 42800-56000-000

Rear Linkage (empty) Talaria Sting MX3 / MX4

Talaria OEM Replacement part.

Reference: 42700-56000-000

Replacement suspension Triangle Talaria Sting MX3 (Discontinued)

Talaria OEM Replacement part. Not manufactured anymore, TL-S004 (aftermarket part) replaces perfectly.

Reference: 40486-56002-000

Replacement Front Axle for Fastace Fork Talaria / Sur-Ron

Does not include set bolts. Needs to be purchased separately!

Reference: 40486-56005-000

Replacement Front Axle for Talaria Factory (Axle only) Fork Talaria / Sur-Ron

Does not include set bolt. Need to be purchased separately!

Reference: 40487-56005-000

Front Axle Set Bolt (TALARIA FACTORY) (1)

Talaria OEM Replacement part.

Reference: 43535-56000-000

Head Tube Spacer (42-30-0.5) Talaria Sting MX3 / MX4 / MX5 / X3

Talaria OEM Replacement part.

Reference: 13555-56000-000

Lower Headset Washer Talaria Sting MX3 / MX4 / MX5 / X3

Talaria OEM Replacement part.

Reference: 13213-56000-000

Headset Bearing With Race (Upper or Lower) Talaria Sting MX3 / MX4 / MX5 / X3 / Komodo / Sur-Ron LBX (1)

Talaria OEM Replacement part.

Reference: 13511-56000-000

Upper Headset Cap Talaria Sting MX3 / MX4 / X3 (Discontinued)

Talaria OEM Replacement part. Superseded by newer rubber version P/N 13512-56000-000.

Reference: 40500-56000-000

Headset Tensioner Cap with Star Washer (Fits 22mm ID Steer Tube)

Necessary to sucessfully install a new fork, can't be re-used from the previous one, and not included in many fork brands. This model will fit most original forks (RST, DNM, Fastace, Factory, KKE) Please measure the INSIDE diameter of the steer tube to order the correct unit. (22mm / 0.866'') Aftermarket forks (Fox, Marzocchi, Manitou, Rockshox, BOS,...

Reference: 40501-56000-000

Headset Tensioner Cap with Star Washer (Fits 25mm ID Steer Tube)

Necessary to sucessfully install a new fork, can't be re-used from the previous one, and not included in many fork brands.This model will fit most aftermarket forks (Fox, Marzocchi, Manitou, Rockshox, BOS, Arma, Ohlins, SR suntour, etc)Please measure the INSIDE diameter of the steer tube to order the correct unit. (25mm / 0.984'')OEM forks (RST, DNM,...

Reference: 13512-56000-000

Upper Headset Cap Talaria Sting MX3 / MX4 / MX5

New updated rubber version that provides a better seal to help reduce water from reaching into the bearings. Perfectly replaces the older model P/N 13511-56000-000.

Reference: GS-019

85cc MX fork Conversion kit Gritshift Talaria Sting MX3 / MX4 / MX5

If you are one of the few riders that have decided the Sur Ron and Talaria Platforms cant support Mountain Bike suspension and have blown through multiple forks at thousands of dollars then this kit is for you! Introducing the GritShift Big Sender Fork conversion Kits for Sur Ron and Talaria.

Reference: 40492-56005-000

Replacement Oil Seal and Dust Seal (1) for Factory Fork Talaria / Sur-Ron

Replacement fork seal for the Talaria Factory Fork

Reference: MP-08-0768

Steering Head Race Puller 40mm Motion Pro

The best tool on the market to remove bearing races easily

Reference: 40499-56001-000

Replacement Fork Protectors DNM Talaria / Sur-Ron (2)

Reference: 40499-56002-000

Replacement Fork Protectors Fastace Talaria / Sur-Ron (2)

Reference: 40499-56005-000

Replacement Fork Protectors Talaria Factory Talaria / Sur-Ron (2)

Reference: 40492-56002-000

Replacement Seal (1) for Fastace Fork Talaria / Sur-Ron

Replacement fork seal for the Fastace Fork.

Reference: TL-S012

SKF Fork Seals For FASTACE fork (37mm Stanchions) Sur-ron / Talaria

Attention! One kit includes 1x oil seal and 1x dust seal from highest quality materials as usual with SKF. Requires 2x kits to rebuild a complete fork!

Reference: TL-S014/BL

DNM Fork Axle caps (2) Talaria Sting / X3 / Sur-Ron LB-X

Attention! Only suitable for DNM fork.

Reference: 42716-56A00-000

Replacement Lower Leg Bolt Talaria Factory

Reference: 40490-56001-000

Left & Right Replacement Fork Legs (DNM)

Talaria OEM Replacement part.