Reference: MP-08-0768
The best tool on the market to remove bearing races easily
Reference: 01-04190
A versatile performer with a tough nylon carcass and raised dimpled knobs that work well in a variety of terrain. Narrow knobby configuration means less of an environmental foot print on the trail. 4 ply rated. DOT approved. Not intended for extended highway use. All sizes will work for front or rear fitment. 2.85kg / 6.28 lbs
Reference: 35450-56A30-000
The radial design of the brake master ensures low friction, reducing transmission losses. It also enables the conversion of (small/large) transmission ratios, which improves modulation and control. The 4-piston brake calliper forged in one piece has a high degree of rigidity, resulting in outstanding braking force and the best possible modulation.
Reference: 35530-56A30-000
The radial design of the brake master ensures low friction, reducing transmission losses. It also enables the conversion of (small/large) transmission ratios, which improves modulation and control. The 4-piston brake calliper forged in one piece has a high degree of rigidity, resulting in outstanding braking force and the best possible modulation.
Reference: 341425-01
A smooth, dark blue, E.P. Lithium complex multi-purpose grease manufactured in a NLGI #2 consistency- with the added benefits of a high density polymer to provide optimum service under most ambient temperature conditions. For use from -29°C (-20°F) to 293°C (560°F). This distinctive multi-functional lubricating grease has very good mechanical stability...
Reference: 24-01015
For off-road application, chain should be promoted with upgraded steel alloy for all parts, subject to going through exclusive heat-treating process as well, to remarkably reinforce its toughness against rugged terrain riding. KMC employs chromized pin and solid bushing into this chain to boost up its wear endurance and shock absorption to a great extent....
Reference: 35533-56A03-000
Original replacements from Magura, price is for a set of 2x pads (to fit one caliper).
Reference: 341426-14
For use in mineral-based brake and hydraulic systems specifying mineral oils. Developed in collaboration with a premium OEM component manufacturer. Mineral based formula does not damage painted surfaces or carbon fiber. Low maintenance formula does not absorb moisture like DOT fluids. High boil point and minimal frequency of system bleeds. Zero-fade...
Reference: 341426-15
For use in mineral-based brake and hydraulic systems specifying mineral oils. Developed in collaboration with a premium OEM component manufacturer. Mineral based formula does not damage painted surfaces or carbon fiber. Low maintenance formula does not absorb moisture like DOT fluids. High boil point and minimal frequency of system bleeds. Zero-fade...
