GritShift is tired of replacing weak floppy skid plates every other week. A change needed to incur. The fatal flaw of the Sur Ron and talaria skid plate is the lack of support, most moto-style skid plates have a support structure (Frame rail) underneath the thin lightweight metals to support and protect the skid plate from excess deformation. This is the biggest design flaw in the Sur Ron and Talaria Skid Plates, they are self-supported, and the only thing that would stop the thin weak metal form from deforming is crucial components such as the motor, throttle connection, or regulator. Not ideal in any form of riding.
The GritShift R+D Team has spent months testing skid plates for the Talaria and Sur Ron, they have survived the Redbull TKO with no issues, But still, slight tweaks were made to improve the quality for the dedicated hard-enduro rider. We needed to optimize to ensure angles were precise for log jumps, and rocky step-ups. We are Happy to introduce the GritShift Heavy Hitter Skid plate. Your one-time solution to skid plates on your Favorite E-bikes. Features 7075 T6 Billet aluminum Side Supports, and replaceable billet aluminum bash plates. This has been stress analyzed to withstand over 4000 LBs of force to the bash plates.
Référence: 12653-56000-000
Talaria OEM Replacement part.
Référence: 32431-56000-000
Talaria OEM Replacement part.
Référence: 12121-56000-000
Talaria OEM Replacement part.
Référence: GS-012
GritShift has produced an amazing upgrade for your favorite e-bike. The rear suspension linkage has been a known weak point in the stock suspension set up since day one. Many riders have complained about suspension noise and play since the bike was released. That play means there's only a matter of time till bearing failure and linkage failures are...
Référence: GS-013
Suspension triangles are an element that hold big pressure during jumps and other off-road riding. The Factory part is made from relatively cheap aluminum material that may break into 2 different pieces after excessive load or on landing. GritShift offers a reinforced billet aluminum upgrade that can handle the gnarliest conditions.
Référence: GUT-002/GY
Guts Racing quality seat for Talaria Sting electric dirt bike.
Référence: TL-FA004
Passenger Pegs for the Talaria Sting Adjustable Foot Pegs Mount. Foldable auxiliary pegs with anti-slip knurled thread design.
Référence: SR-F068
Repose-pieds en aluminium 7075 T6 pour une résistance et une durabilité élevées. Traitement de surface : Anodisé. Plate-forme extra large pour vous offrir un maximum de traction et de contrôle. Les dents en acier inoxydable augmentent la friction entre les pieds et la pédale, ne glissent pas facilement, maintiennent votre pied en place. Les dents sont...
Référence: TL-FA003
CNC aluminium foot pegs mounts, Will not bend like the original ones, however, using a V1 peg brace is still recommended. ATTENTION! The kick stand from a Sting R MX4 will need to be modified (filed down 1mm) so it can be used
Référence: 12126-56000-000
Talaria OEM Replacement part.
Référence: GUT-002/WH
Guts Racing quality seat for Talaria Sting electric dirt bike.
Référence: TL-FA002
Shock protector for the Talaria Sting. The sand and mud from the back wheel can damage the rear suspension over time and this is the perfect part to protect it.
Référence: KA-006
ATTENTION!! All kits from Kaniwaba comes with a few minor visual damages that does not affect performance. They might look like used/returned products but this is the way we receive them from Kaniwaba. Carefully designed Pedal Kit for the TALARIA Sting. Left and right side brackets are made of a single piece to stand drops and tough conditions! This...
Référence: 12122-56000-000
Talaria OEM Replacement part.
Référence: 32881-56000-000
Talaria OEM Replacement part.
Référence: SR-F070
Repose-pieds en aluminium 7075 T6 pour une résistance et une durabilité élevées. Traitement de surface : Anodisé. Plate-forme extra large pour vous offrir un maximum de traction et de contrôle. Les dents en acier inoxydable augmentent la friction entre les pieds et la pédale, ne glissent pas facilement, maintiennent votre pied en place. Les dents sont...
Référence: KA-007
Replacement chain for the Kaniwaba Talaria Sting pedal system.
Référence: SR-F074
Béquille réglable en aluminium anodisé 6061 T6 pouvant être ajustée de haut en bas de 1,2 '' (30 mm). Conçu pour s'adapter à différentes roues et tailles de suspension. La base d'appui latérale est agrandie pour augmenter la surface de contact avec le sol. Le vélo peut être plus stable. Les pièces usinées CNC sont plus légères que le vélo d'origine....
Référence: 12123-56000-000
Talaria OEM Replacement part.
Référence: 43171-56000-000
Talaria OEM Replacement part.
GritShift is tired of replacing weak floppy skid plates every other week. A change needed to incur. The fatal flaw of the Sur Ron and talaria skid plate is the lack of support, most moto-style skid plates have a support structure (Frame rail) underneath the thin lightweight metals to support and protect the skid plate from excess deformation. This is the biggest design flaw in the Sur Ron and Talaria Skid Plates, they are self-supported, and the only thing that would stop the thin weak metal form from deforming is crucial components such as the motor, throttle connection, or regulator. Not ideal in any form of riding.
The GritShift R+D Team has spent months testing skid plates for the Talaria and Sur Ron, they have survived the Redbull TKO with no issues, But still, slight tweaks were made to improve the quality for the dedicated hard-enduro rider. We needed to optimize to ensure angles were precise for log jumps, and rocky step-ups. We are Happy to introduce the GritShift Heavy Hitter Skid plate. Your one-time solution to skid plates on your Favorite E-bikes. Features 7075 T6 Billet aluminum Side Supports, and replaceable billet aluminum bash plates. This has been stress analyzed to withstand over 4000 LBs of force to the bash plates.
