Référence: 50300-56A00-000
This display will ONLY fit the MX4 / TL4000 (any submodels) or XXX / TL2500 bikes. Please do not order for any other models as it will not work.
Référence: 40492-56005-000
Joint de fourche de remplacement pour la fourche Talaria Factory
Référence: 31820-56040-000
Factory-made high-quality pedal kit for Talaria Sting MX3 & MX4 designed for perfect fitment. Crafted with precision by the original manufacturer, this kit allows you to easily convert your electric dirt bike to a pedal-assist setup or meet local regulations where pedals are required.
Référence: 14005-54000-000
Throttle wire adaptor allowing to use Talaria Sting MX4/MX5 and X3 (green connector) on the Talaria Sting MX3 (square connectors)
Référence: NU-CBLE
Module for configuring the controller via Android and iOS apps. It can be used instead of the On-board computer. It connects to the CAN-bus. If you order the controller and the module, a 1.2 meter long (47 inch) CAN wire (PHD-JWPF) will be included in the controller. If in addition to the module, the kit will include an On-Board computer, you need to...
Référence: NU-CCANPHD-40cm
Wire for connection to the CAN-bus of the On-board computer, uLight, BMS and other devices from Nucular. Crimped on both sides with PHD 2.0 6P connectors. Three different lengths.
Référence: NU-CTALAD
Nucular Replacement parts.
Référence: NU-CTHR
Nucular Replacement parts. Wired for a Nucular screen, will require to be re-wired for any other controller brand.
Référence: 50400-56000-000
Talaria OEM Replacement part.
Référence: NU-CCANPHD-200cm
Wire for connection to the CAN-bus of the On-board computer, uLight, BMS and other devices from Nucular. Crimped on both sides with PHD 2.0 6P connectors. Three different lengths.
Référence: NU-CCANPHD-120cm
Wire for connection to the CAN-bus of the On-board computer, uLight, BMS and other devices from Nucular. Crimped on both sides with PHD 2.0 6P connectors. Three different lengths.
Référence: 50300-56A00-000
This display will ONLY fit the MX4 / TL4000 (any submodels) or XXX / TL2500 bikes. Please do not order for any other models as it will not work.
Référence: NU-CSURKIT
Wire extensions with bolts and nuts. For connection P24F controller to stock motor of Sur-Ron Light Bee. Also suitable as extension cords when installing the ChiBattery 72V on the Talaria XXX.
Référence: NU-CCCOVER
Plastic covers to protect wires coming in/out of the Nucular Controller. Sold as a set (upper and lower piece)
Référence: 50030-54001-000
Talaria OEM Replacement part.
