This display will ONLY fit the MX3 / TL3000 bikes. Please do not order for any other models as it will not work.
Référence: 40486-56005-000
N'inclus pas l'embout (set bolt). Doit être acheté séparément!
Référence: SR-HA027
Everything needed to increase height by 2'' on any direct mount stem.
Référence: 35530-56A01-000
Talaria OEM Replacement part.
Référence: 50180-5601B-000
Talaria OEM Replacement part. Attention! Only work with green connector wire. Only looking for the screws? We have them in the OEM shop ; 10429-56000-000
Référence: NU-CTHR
Nucular Replacement parts. Wired for a Nucular screen, will require to be re-wired for any other controller brand.
Référence: 50030-54001-000
Talaria OEM Replacement part.
Référence: 50020-56000-000
Talaria OEM Replacement part.
Référence: NU-CCANPHD-40cm
Wire for connection to the CAN-bus of the On-board computer, uLight, BMS and other devices from Nucular. Crimped on both sides with PHD 2.0 6P connectors. Three different lengths.
Référence: NU-CCCOVER
Plastic covers to protect wires coming in/out of the Nucular Controller. Sold as a set (upper and lower piece)
Référence: 50400-56000-000
Talaria OEM Replacement part.
Référence: 50190-56001-000
Talaria OEM Replacement part.
Référence: NU-CCANPHD-120cm
Wire for connection to the CAN-bus of the On-board computer, uLight, BMS and other devices from Nucular. Crimped on both sides with PHD 2.0 6P connectors. Three different lengths.
Référence: NU-CBLE
Module for configuring the controller via Android and iOS apps. It can be used instead of the On-board computer. It connects to the CAN-bus. If you order the controller and the module, a 1.2 meter long (47 inch) CAN wire (PHD-JWPF) will be included in the controller. If in addition to the module, the kit will include an On-Board computer, you need to...
Référence: 50170-56000-000
Talaria OEM Replacement part.
Référence: NU-CDCASE2
Nucular Replacement parts.