Talaria OEM Replacement part. Attention! Only work with green connector wire. Only looking for the screws? We have them in the OEM shop ; 10429-56000-000
Référence: 14005-54000-000
Throttle wire adaptor allowing to use Talaria Sting MX4/MX5 and X3 (green connector) on the Talaria Sting MX3 (square connectors)
Référence: 12122-56000-000
Talaria OEM Replacement part.
Référence: ODI-H00TL/BK
Constructed from proprietary material compounds that we have spent over 25 years perfecting, the new Troy Lee Designs motocross grips were developed and tested to perform at the highest level of competition. With reinforced ends for durability and a directional pattern that provides additional traction when the rider pulls back, ODI grips are engineered...
Référence: TL-FA007
This can prevent the frame neck from getting loose (Egg shaped) due to an improper headset tension.
Référence: 35460-56A00-000
Talaria OEM Replacement part.
Référence: 50190-56001-000
Talaria OEM Replacement part.
Référence: 50300-56000-000
This display will ONLY fit the MX3 / TL3000 bikes. Please do not order for any other models as it will not work.
Référence: TA-E001
Plug and play turn signal kit with everything needed for install. Front turn signals double as bright Running Lights. License plate light: Rear turn Signal Light included. Headlight switch included, when headlight is on off position, brake light, and signals are still functional, although running lights will be turned off. Turn Signal light switch...
Référence: 50020-56000-000
Talaria OEM Replacement part.
Référence: NU-CCANPHD-200cm
Wire for connection to the CAN-bus of the On-board computer, uLight, BMS and other devices from Nucular. Crimped on both sides with PHD 2.0 6P connectors. Three different lengths.
Référence: NU-CCCOVER
Plastic covers to protect wires coming in/out of the Nucular Controller. Sold as a set (upper and lower piece)
Référence: NU-CSURKIT
Wire extensions with bolts and nuts. For connection P24F controller to stock motor of Sur-Ron Light Bee. Also suitable as extension cords when installing the ChiBattery 72V on the Talaria XXX.
Référence: NU-CBLE
Module for configuring the controller via Android and iOS apps. It can be used instead of the On-board computer. It connects to the CAN-bus. If you order the controller and the module, a 1.2 meter long (47 inch) CAN wire (PHD-JWPF) will be included in the controller. If in addition to the module, the kit will include an On-Board computer, you need to...
Référence: NU-CDCASE2
Nucular Replacement parts.
Talaria OEM Replacement part. Attention! Only work with green connector wire. Only looking for the screws? We have them in the OEM shop ; 10429-56000-000
